11-Triethoxysilylundecan-1-Amine - Names and Identifiers
11-Triethoxysilylundecan-1-Amine - Physico-chemical Properties
Molecular Formula | C17H39NO3Si
|
Molar Mass | 333.58 |
Density | 0,895 g/cm3 |
Boling Point | 165-169°C 0,2mm |
Flash Point | 179.1°C |
Vapor Presure | 9.6E-06mmHg at 25°C |
Specific Gravity | 0.895 |
pKa | 10.67±0.10(Predicted) |
Storage Condition | Room Temprature |
Sensitive | Moisture Sensitive |
Refractive Index | 1.4352 |
11-Triethoxysilylundecan-1-Amine - Risk and Safety
Risk Codes | 34 - Causes burns
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
|
UN IDs | 2735 |
TSCA | No |
11-Triethoxysilylundecan-1-Amine - Introduction
11-Aminoundecyltriethoxysilane is an organosilicon compound, often abbreviated as A- 1130. The following is a description of the nature, use, preparation and safety information of the A- 1130:
Nature:
-Appearance: Colorless to light yellow liquid
-Molecular formula: C23H58NOSi
-Molecular weight: 414.88g/mol
-Melting point:-72 ℃
-Boiling point: 230-240 ℃
-Density: 0.881g/cm3
-Solubility: Soluble in organic solvents, insoluble in water
-Stability: relatively stable to acid and alkali
Use:
- A- 1130 is widely used in coatings, adhesives and sealants and other industrial fields. It can be used as additives such as toughening agent, adhesion agent and anti-moisture agent to improve the wear resistance, adhesion and water resistance of the coating.
-In building materials, A- 1130 can be used as a modifier to improve the adhesion, water resistance and weather resistance of materials such as cement, gypsum and concrete.
-Because its molecular structure contains amino and ethoxy functional groups, A- 1130 can also be used as surfactants, emulsifiers and dispersants.
Preparation Method:
- A- 1130 is obtained by reacting undecylammonium bromide with 3-aminotriethoxysilane. First, undecylammonium bromide is reacted with 3-aminotriethoxysilane under appropriate conditions and purified by distillation to obtain a pure product.
Safety Information:
- A- 1130 is a low-toxic compound under routine use conditions, but it is still necessary to pay attention to safe operation and avoid contact with skin and eyes.
-During use, good ventilation conditions should be maintained to avoid inhalation of its vapor. Immediately after contact, rinse with plenty of water and seek medical help.
-When storing, the A- 1130 should be sealed and stored in a dry, cool place, away from fire and oxidizing agents.
Last Update:2024-04-10 22:29:15