116047-42-8 - Names and Identifiers
116047-42-8 - Physico-chemical Properties
Molecular Formula | C17H36O4Si
|
Molar Mass | 332.55 |
Density | 0.920±0.06 g/cm3(Predicted) |
Boling Point | 150-155°C 0,5mm |
Flash Point | >165°C |
Vapor Presure | 0mmHg at 25°C |
Specific Gravity | 0.930 |
Storage Condition | Room Temprature |
Sensitive | 7: reacts slowly with moisture/water |
Refractive Index | 1.4343 |
116047-42-8 - Risk and Safety
Risk Codes | 36/37/38 - Irritating to eyes, respiratory system and skin.
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
|
TSCA | No |
116047-42-8 - Introduction
Triethoxysilylundecane, also known as undecane triethoxymethylsilane (11-(triethoxysilyl)undecane), is an organosilicon compound.
Nature:
-Appearance: Colorless to light yellow liquid.
-Molecular formula: C20H44O3Si
-Molecular weight: 372.67g/mol
-Boiling Point: 142-147°C
-Density: 0.88g/cm3
-Melting point: -62°C
-Solubility: Soluble in organic solvents, such as alcohol, ether and ether solvents.
Use:
-Surface treatment agent: Triethoxysilylundecane can be used for surface treatment to improve the adhesion and durability of coatings, inks and adhesives on various materials.
-Silicone rubber pre-crosslinking agent: This compound can be used as a pre-crosslinking agent for silicone rubber to enhance the strength and wear resistance of silicone rubber.
-Functional materials: Triethoxysilylundecane can also be used to prepare functional materials with special properties, such as coating agents and nanocomposites.
Method:
Triethoxysilylundecane is generally synthesized by a silylation reaction. The specific step is to react the silyl compound with ethanol to produce triethoxysilylundecane.
Safety Information:
-Triethoxysilylundecane is irritating to the skin and eyes, and should be rinsed with water immediately after contact.
-During use, care should be taken to avoid inhaling its steam or dust and maintain a well-ventilated place.
-During storage, the compound should be kept away from fire and oxidizing agents.
-In handling and storage, should follow the relevant safety procedures and protective measures.
Last Update:2024-04-10 22:29:15