122030-04-0
2,4,6-Trifluorobenzotrifluoride
CAS: 122030-04-0
Molecular Formula: C7H2F6
122030-04-0 - Names and Identifiers
| Name | 2,4,6-Trifluorobenzotrifluoride |
| Synonyms | à,à,à,2,4,6-hexafluorotoluene 2,4,6-Trifluorobenzotrifluoride 2,4,6-Trifluorobenzotrifluorode 2,4,6-TRIFLUOROBENZOTRIFLUORIDE 1,3,5-TRIFLUORO-2-TRIFLUOROMETHYL-BENZENE 2,4,6-Trifluoro-1-(trifluoromethyl)benzene 1,3,5-trifluoro-2-(trifluoromethyl)benzene (2,6-difluorophenyl)(4-methylphenyl)methanone alpha,alpha,alpha,2,4,6-Hexafluorotoluene~1,3,5-Trifluoro-2-(trifluoromethyl)benzene |
| CAS | 122030-04-0 |
| EINECS | 680-751-4 |
| InChI | InChI=1/C14H10F2O/c1-9-5-7-10(8-6-9)14(17)13-11(15)3-2-4-12(13)16/h2-8H,1H3 |
122030-04-0 - Physico-chemical Properties
| Molecular Formula | C7H2F6 |
| Molar Mass | 200.08 |
| Density | 1.475g/mLat 25°C(lit.) |
| Boling Point | 105-107°C |
| Flash Point | 124°F |
| Water Solubility | Not miscible or difficult to mix in water. |
| Vapor Presure | 5.11E-05mmHg at 25°C |
| Storage Condition | Flammables area |
| Refractive Index | 1.384-1.386 |
122030-04-0 - Risk and Safety
| Hazard Symbols | Xi - Irritant |
| Risk Codes | R10 - Flammable R36/37/38 - Irritating to eyes, respiratory system and skin. R11 - Highly Flammable |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36 - Wear suitable protective clothing. S37/39 - Wear suitable gloves and eye/face protection S16 - Keep away from sources of ignition. |
| UN IDs | UN 1993 3/PG 3 |
| WGK Germany | 3 |
| HS Code | 29036990 |
| Hazard Note | Irritant |
| Hazard Class | 3 |
| Packing Group | III |
122030-04-0 - Introduction
2,4, 6-trifluorotoluene, also known as trifluorotoluene, is an organic compound. The following is a description of its nature, use, preparation and safety information:
Nature:
2,4, 6-trifluorotoluene is a colorless transparent liquid with a benzene-like odor. It has a high density and is insoluble in water, but can be dissolved in many organic solvents. It has a lower boiling point and a higher ignition point, belonging to the organic fluorine compound.
Use:
2,4, 6-trifluorotoluene is widely used as an important organic solvent in industry. Because of its good stability and solubility, it can be used to dissolve and dilute many organic compounds. In addition, it can also be used as a component of coatings, inks, synthetic materials and adhesives.
Preparation Method:
The preparation of 2,4, 6-trifluorotoluene is mainly carried out by fluorination reaction. A common method of preparation involves a fluorinated alkane or chlorinated hydrocarbon and the addition of a fluorinating agent, such as hydrogen fluoride or potassium fluoride. These reactions may be carried out at appropriate temperatures and pressures, and the products purified by appropriate separation techniques.
Safety Information:
2,4, 6-trifluorotoluene is volatile under certain conditions, and excessive inhalation may cause damage to human health. Therefore, good ventilation measures should be taken during use to avoid inhalation of excessive gas or contact with liquids. At the same time, wear appropriate protective equipment, such as respirators, protective glasses and rubber gloves. In case of contact with skin or eyes, rinse immediately with plenty of water and consult a doctor. When storing and carrying, avoid contact with oxidants, acids or high temperatures to avoid dangerous reactions.
Nature:
2,4, 6-trifluorotoluene is a colorless transparent liquid with a benzene-like odor. It has a high density and is insoluble in water, but can be dissolved in many organic solvents. It has a lower boiling point and a higher ignition point, belonging to the organic fluorine compound.
Use:
2,4, 6-trifluorotoluene is widely used as an important organic solvent in industry. Because of its good stability and solubility, it can be used to dissolve and dilute many organic compounds. In addition, it can also be used as a component of coatings, inks, synthetic materials and adhesives.
Preparation Method:
The preparation of 2,4, 6-trifluorotoluene is mainly carried out by fluorination reaction. A common method of preparation involves a fluorinated alkane or chlorinated hydrocarbon and the addition of a fluorinating agent, such as hydrogen fluoride or potassium fluoride. These reactions may be carried out at appropriate temperatures and pressures, and the products purified by appropriate separation techniques.
Safety Information:
2,4, 6-trifluorotoluene is volatile under certain conditions, and excessive inhalation may cause damage to human health. Therefore, good ventilation measures should be taken during use to avoid inhalation of excessive gas or contact with liquids. At the same time, wear appropriate protective equipment, such as respirators, protective glasses and rubber gloves. In case of contact with skin or eyes, rinse immediately with plenty of water and consult a doctor. When storing and carrying, avoid contact with oxidants, acids or high temperatures to avoid dangerous reactions.
Last Update：2024-04-09 21:11:58
