14319-08-5

14319-08-5 - Names and Identifiers

Name	Aluminum(III)2,2,6,6-tetramethyl-3,5-heptanedionat
Synonyms	Aluminumtetramethylheptanedionat Aluminum(III)2,2,6,6-tetramethyl-3,5-heptanedionat Aluminum iii 2,2,6,6-tetramethyl3,5-heptanedionate ALUMINUM(III)2,2,6,6-TETRAMETHYL-3,5-HEPTANEDIONAT ALUMINUM III 2,2,6,6-TETRAMETHYL-3,5-HEPTANEDIONATE Tris(2,2,6,6-tetramethyl-3,5-heptanedionato)aluminum TRIS(2,2,6,6-TETRAMETHYL-3,5-HEPTANEDIONATO)ALUMINUM Aluminum(III) 2,2,6,6-tetramethyl-3,5-heptanedionate ALUMINUM TRIS(2,2,6,6-TETRAMETHYL-3,5-HEPTANEDIONATE) Aluminum tris(2,2,6,6-tetramethyl-3,5-heptanedionate) Tris-(2,2,6,6-Tetramethyl-3,5-heptanedionato)aluminum Aluminum, tris(2,2,6,6-tetramethyl-3,5-heptanedionato)- Tris(2,2,6,6-tetramethyl-3,5-heptanedionato)aluminum(III) Aluminum, tris(2,2,6-tetramethyl-3,5-heptanedionato-O,O')-, (OC-6-)- Aluminum, tris(2,2,6,6-tetramethyl-3,5-heptanedionato-O,O')-, (OC-6-11)-
CAS	14319-08-5
InChI	InChI=1/3C11H21O2.Al/c31-10(2,3)8(12)7-9(13)11(4,5)6;/h37,12-13H,1-6H3

14319-08-5 - Physico-chemical Properties

Molecular Formula	C33H57AlO6
Molar Mass	576.78
Melting Point	264-267 °C (lit.)
Boling Point	>400°C
Flash Point	>400°C
Appearance	crystal
Color	white
Storage Condition	Room Temprature
Sensitive	4: no reaction with water under neutral conditions
MDL	MFCD00058918

14319-08-5 - Risk and Safety

Risk Codes	36/37/38 - Irritating to eyes, respiratory system and skin.
Safety Description	S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
WGK Germany	3
TSCA	No

14319-08-5 - Introduction

Aluminum tris (2,2,6,6-tetramethyl-3,5-heptanedionoate), also known as TATM(Tri(2,2,6,6-tetramethyl-3,5-heptanedionato)aluminum), is an aluminum complex. The following is a description of its nature, use, preparation and safety information:

Nature:
1. Appearance: White crystalline solid.
2. melting point: about 155-158 ℃.
3. Solubility: Soluble in organic solvents, such as ether, acetone and toluene.

Use:
1. as an organometallic complex, often used as a catalyst in chemical synthesis.
2. In the preparation of organic electronic devices, it can be used as a precursor for light-emitting diode (LED) materials.
3. In the chemical vapor deposition method, it can be used as a metal organic precursor material.

Preparation Method:
Generally, TATM aluminum can be prepared by reacting 2,2, 6,6-tetramethyl -3,5-heptanedione (TMHD) with aluminum chloride (AlCl3) in an organic solvent.

Safety Information:
1. TATM aluminum should be stored in a sealed container, avoid contact with air, avoid humid environment and high temperature.
2. when using, need to wear appropriate protective gloves, glasses and personal protective equipment such as face mask.
3. TATM aluminum is toxic and may cause health and environmental hazards. Direct contact with skin and inhalation of its dust or vapor should be avoided.
4. in the use, storage and handling of TATM aluminum, should comply with the relevant safety procedures, follow the storage, transportation and handling of dangerous goods standards.

Before using TATM aluminum or other chemicals, make sure to study and understand the relevant safety information in detail, and seek professional advice if necessary.

Last Update：2024-04-09 20:02:46