153034-88-9
2-CHLORO-4-IODO-3-METHYLPYRIDINE
CAS: 153034-88-9
Molecular Formula: C6H5ClIN
153034-88-9 - Names and Identifiers
| Name | 2-CHLORO-4-IODO-3-METHYLPYRIDINE |
| Synonyms | 2-CHLORO-4-IODO-3-PICOLINE 2-Chloro-4-Iodo-3-Methylpyridne 2-CHLORO-4-IODO-3-METHYLPYRIDINE Pyridine, 2-chloro-4-iodo-3-methyl- 2-Chloro-4-iodo-3-methyl-pyridine, 2-Chloro-4-iodo-3-picoline |
| CAS | 153034-88-9 |
| InChI | InChI=1/C6H5ClIN/c1-4-5(8)2-3-9-6(4)7/h2-3H,1H3 |
153034-88-9 - Physico-chemical Properties
| Molecular Formula | C6H5ClIN |
| Molar Mass | 253.47 |
| Density | 1.906±0.06 g/cm3(Predicted) |
| Melting Point | 101-106℃ |
| Boling Point | 274.9±35.0 °C(Predicted) |
| Flash Point | 120.053°C |
| Solubility | soluble in Toluene |
| Vapor Presure | 0.009mmHg at 25°C |
| Appearance | powder to crystal |
| Color | White to Light yellow to Light orange |
| pKa | 0.58±0.10(Predicted) |
| Storage Condition | under inert gas (nitrogen or Argon) at 2–8 °C |
| Sensitive | Light Sensitive |
| Refractive Index | 1.624 |
| MDL | MFCD03095293 |
153034-88-9 - Risk and Safety
| Hazard Symbols | Xn - Harmful |
| Risk Codes | R22 - Harmful if swallowed R41 - Risk of serious damage to eyes |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S39 - Wear eye / face protection. |
| WGK Germany | 1 |
| Hazard Class | IRRITANT |
153034-88-9 - Introduction
It is an organic compound with the chemical formula C7H5ClIN. The following is a description of its nature, use, preparation and safety information:
Nature:
-Appearance: Colorless to pale yellow crystals or solids.
-Melting point: About 50-55 ℃.
-Boiling point: About 198-200 ℃.
-Solubility: Soluble in some organic solvents, such as ethanol and dichloromethane.
Use:
-is useful as an intermediate in organic synthesis. It can be used to synthesize other compounds, such as drugs in the field of medicine.
-It can also be used as a dye ingredient in dyes, paints and cosmetics.
Method:
-The preparation method of-phosphonium can be obtained by reacting methyl pyridine iodide with cuprous chloride.
-The reaction conditions may be carried out under heating and stirring, and the reaction is usually carried out in an organic solvent.
-The preparation process needs to pay attention to laboratory safety operation specifications, the use of protective gloves, safety glasses and other personal protective equipment.
Safety Information:
-irritant to skin and eyes.
-After contact, immediately flush the affected area with plenty of water and seek medical help.
-When using or handling the compound, it should comply with laboratory safety practices and be stored in a sealed container, away from ignition and oxidizing agents.
Please note that the preparation and handling of chemical substances need to strictly follow the safety practices, and use appropriate personal protective equipment according to the specific situation. The above information is for reference only. Please refer to relevant literature and safety materials for specific operation and use.
Nature:
-Appearance: Colorless to pale yellow crystals or solids.
-Melting point: About 50-55 ℃.
-Boiling point: About 198-200 ℃.
-Solubility: Soluble in some organic solvents, such as ethanol and dichloromethane.
Use:
-is useful as an intermediate in organic synthesis. It can be used to synthesize other compounds, such as drugs in the field of medicine.
-It can also be used as a dye ingredient in dyes, paints and cosmetics.
Method:
-The preparation method of-phosphonium can be obtained by reacting methyl pyridine iodide with cuprous chloride.
-The reaction conditions may be carried out under heating and stirring, and the reaction is usually carried out in an organic solvent.
-The preparation process needs to pay attention to laboratory safety operation specifications, the use of protective gloves, safety glasses and other personal protective equipment.
Safety Information:
-irritant to skin and eyes.
-After contact, immediately flush the affected area with plenty of water and seek medical help.
-When using or handling the compound, it should comply with laboratory safety practices and be stored in a sealed container, away from ignition and oxidizing agents.
Please note that the preparation and handling of chemical substances need to strictly follow the safety practices, and use appropriate personal protective equipment according to the specific situation. The above information is for reference only. Please refer to relevant literature and safety materials for specific operation and use.
Last Update：2024-04-09 19:05:46
Supplier List
Spot supply
Product Name: 2-Chloro-4-iodo-3-methylpyridine Visit Supplier Webpage Request for quotationCAS: 153034-88-9
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
Spot supply
Product Name: 2-Chloro-4-iodo-3-methylpyridine Visit Supplier Webpage Request for quotationCAS: 153034-88-9
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
View History