18162-82-8

18162-82-8 - Names and Identifiers

Name	Chloromethyltriisopropoxysilane96
Synonyms	Chloromethyltriisopropoxysilane96 CHLOROMETHYLTRIISOPROPOXYSILANE 96 chloromethyl-tri(propan-2-yloxy)silane Silane,(chloromethyl)tris(1-methylethoxy)- (chloromethyl)[tris(propan-2-yloxy)]silane
CAS	18162-82-8
EINECS	200-258-5
InChI	InChI=1/C10H23ClO3Si/c1-8(2)12-15(7-11,13-9(3)4)14-10(5)6/h8-10H,7H2,1-6H3

18162-82-8 - Physico-chemical Properties

Molecular Formula	C10H23ClO3Si
Molar Mass	254.83
Density	0.962 g/mL at 25 °C (lit.)
Boling Point	195-198°C
Flash Point	181°F
Vapor Presure	0.041mmHg at 25°C
Specific Gravity	0.9836
Storage Condition	Inert atmosphere,Room Temperature
Sensitive	7: reacts slowly with moisture/water
Refractive Index	1.4145
Physical and Chemical Properties	WGK Germany:3

18162-82-8 - Risk and Safety

Hazard Symbols	Xi - Irritant
Risk Codes	R37/38 - Irritating to respiratory system and skin. R41 - Risk of serious damage to eyes
Safety Description	S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36 - Wear suitable protective clothing.
UN IDs	UN 3334
WGK Germany	3

18162-82-8 - Introduction

Is an organosilicon compound with the chemical formula (CH3ClSi (OCH(CH3)2)3). The following is a description of the properties, uses, methods of manufacture and safety information:

Nature:
-Appearance: It is a colorless or yellowish liquid.
-Melting point: Melting point is about -80 ℃.
-Boiling point: Boiling point is about 203 ℃.
-solubility: soluble in a variety of organic solvents.

Use:
-Chemical industry: It is often used as a catalyst for polymerization reaction and is used to improve the performance of materials such as silicone rubber, emulsion and synthetic crystals.
-Surface treatment field: It can be used as a coating agent for glass and metal surfaces to provide good water, oil and adhesion resistance.

Method: The preparation of
-is usually obtained by the reaction of methyl chloride and isopropanol. The reaction can be carried out under thionyl chloride catalysis and under appropriate temperature and pressure conditions.

Safety Information:
-It is an organic compound with a certain degree of volatility. Care should be taken to avoid inhaling its vapor.
-After contact with skin or eyes, rinse with water for at least 15 minutes and seek medical attention.
-should be stored away from the fire and oxidant, keep the container closed, stored in a cool, dry place.
-During use, take necessary personal protective measures, such as wearing protective gloves, goggles and protective masks. If inhaled in excess, remove immediately to fresh air and seek medical attention.

Last Update：2024-04-10 22:29:15