Name | 2-Bromo-4,6-dinitroaniline |
Synonyms | 2,4-dinitro-6-bromanilin 6-BROMO-2,4-DINITROANILINE 2,4-Dinitro-6-Bromoaniline 2-Bromo-4,6-dinitroaniline 2,4-DINITRO-6-BROMO ANILINE 2-BROMO-4,6-DINITRONANILINE 2-bromo-4,6-dinitroaminobenzene 2,4-dinitro-6-bromoanilin(czech) Benzenamine, 2-bromo-4,6-dinitro- 1-Amino-6-bromo-2,4-dinitrobenzene |
CAS | 1817-73-8 |
EINECS | 217-329-2 |
InChI | InChI=1/C6H4BrN3O4/c7-4-1-3(9(11)12)2-5(6(4)8)10(13)14/h1-2H,8H2 |
Molecular Formula | C6H4BrN3O4 |
Molar Mass | 262.02 |
Density | 2.1534 (rough estimate) |
Melting Point | 151-153 °C (lit.) |
Boling Point | 400.8±40.0 °C(Predicted) |
Flash Point | 196.2°C |
Solubility | Chloroform (Slightly), Methanol (Slightly, Sonicated) |
Vapor Presure | 1.24E-06mmHg at 25°C |
Appearance | Solid |
Color | Pale Yellow to Light Yellow |
pKa | pK1: -6.94(+1) (25°C) |
Storage Condition | 2-8°C(protect from light) |
Refractive Index | 1.6200 (estimate) |
Physical and Chemical Properties | Yellow needle crystal. melting point 153~154 ℃ soluble in hot water and hot acetone, soluble in hot acetic acid. |
Use | As an intermediate for disperse dyes |
Risk Codes | R36/37/38 - Irritating to eyes, respiratory system and skin. R11 - Highly Flammable |
Safety Description | S37/39 - Wear suitable gloves and eye/face protection S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S16 - Keep away from sources of ignition. |
UN IDs | 1325 |
WGK Germany | 2 |
RTECS | BW9303000 |
TSCA | Yes |
Hazard Class | 4.1 |
Packing Group | III |
Raw Materials | Bromine 2,4-Dinitroaniline |
EPA chemical substance information | information provided by: ofmpeb.epa.gov (external link) |
Use | It is used as an intermediate for disperse dyes to prepare disperse cyan 2GL dye intermediate. Used for the production of dispersed cyan 2GL. |
production method | obtained by reacting 2, 4-dinitroaniline with bromine: add 1800L of water to 300L glass-lining reaction pot, 300kg of 2, 4-dinitroaniline, 100kg of hydrochloric acid and 3kg of chlorinated benzene were stirred for 1H. 180kg of bromine was added at room temperature and reacted at 50-55 ° C. For 6H. Then slowly add sodium hypochlorite (equivalent to 100% available chlorine 33.5), insulation 3H. After reaching the end point, add sodium sulfite aqueous solution (fold 100% 25-30kg), eliminate the remaining bromine, filter wash to neutral, dry to get the finished product. Industrial products are orange crystals, the content is greater than or equal to 98%, the melting point is greater than or equal to 148. Raw material consumption quota: 2, 4-dinitroaniline 770kg/t, bromine 600kg/t. |
toxic substance data | information provided by: pubchem.ncbi.nlm.nih.gov (external link) |