182344-25-8 - Names and Identifiers
182344-25-8 - Physico-chemical Properties
Molecular Formula | C10H8BFO2
|
Molar Mass | 189.98 |
Density | 1.3g/cm3 |
Melting Point | 240-242℃ |
Boling Point | 374°C at 760 mmHg |
Flash Point | 180°C |
Vapor Presure | 2.94E-06mmHg at 25°C |
Appearance | Solid |
Color | White to Orange to Green |
Storage Condition | under inert gas (nitrogen or Argon) at 2-8°C |
Refractive Index | 1.614 |
MDL | MFCD04039221 |
182344-25-8 - Risk and Safety
Hazard Symbols | Xi - Irritant

|
Risk Codes | 20/21/22 - Harmful by inhalation, in contact with skin and if swallowed.
|
Safety Description | 36/37 - Wear suitable protective clothing and gloves.
|
HS Code | 29319090 |
Hazard Note | Irritant |
182344-25-8 - Introduction
acid is an organic compound with the chemical formula C10H7BO2F. It is a crystalline solid with a white to light yellow color. The following is a description of the nature, use, preparation and safety information of the polymer acid:
Nature:
-Appearance: White to light yellow crystalline solid
-Solubility: Soluble in anhydrous alcohol and ether solvents, insoluble in water
-Melting point: about 160-165 ° C
-Density: approx. 1.25g/cm³
Use:
acid can be used as an important intermediate in organic synthesis, and can be used to synthesize other organic compounds, such as fluorescent dyes, organic photoelectric materials, etc.
-It can also be used in the preparation of catalysts, catalysts for organic synthesis reactions, and the synthesis of organic electroluminescent materials.
Method:
-or acid is usually prepared by reacting naphthalene with boric acid. The specific preparation method is that under an inert atmosphere, naphthalene and triethylamine are first added to the reaction vessel as a solvent, triethyl borate is added at room temperature, and then the reaction is slowly heated and stirred, the target product is obtained. Finally, filter, wash and dry to obtain acid.
Safety Information:
-Apple is an irritant to the eyes, skin and respiratory system. Please pay attention to the correct use of personal protective equipment, such as safety glasses, protective gloves and masks.
-When using or handling acid, sufficient ventilation should be provided to prevent the concentration of vapor or dust from exceeding the standard.
-Waste disposal must comply with local laws and regulations and must not be discharged into water bodies or mixed with other waste.
Please note that the information provided above is for reference only. Laboratory safety regulations and operating procedures should be followed when using or handling chemicals.
Last Update:2024-04-10 22:29:15