2,2-双(烯丙氧基甲基)-1-三甲基氧基硅基丁烷

2,2-双(烯丙氧基甲基)-1-三甲基氧基硅基丁烷 - Names and Identifiers

Name	2,2-bis(allyloxymethyl)butoxy-trimethyl-silane
Synonyms	LogP 2,2-bis(allyloxymethyl)butoxy-trimethyl-silane BIS(2-ALLYLOXYMETHYL)-1-TRIMETHYLSILOXY-BUTANE 2,2-bis(prop-2-enoxymethyl)butoxy-trimethylsilane 2,2-BIS(2-ALLYLOXYMETHYL)-1-TRIMETHYLSILOXYBUTANE Silane, [2,2-bis[(2-propen-1-yloxy)methyl]butoxy]trimethyl-
CAS	211923-87-4
InChI	InChI=1/C15H30O3Si/c1-7-10-16-12-15(9-3,13-17-11-8-2)14-18-19(4,5)6/h7-8H,1-2,9-14H2,3-6H3

2,2-双(烯丙氧基甲基)-1-三甲基氧基硅基丁烷 - Physico-chemical Properties

Molecular Formula	C15H30O3Si
Molar Mass	286.48
Density	0,892 g/cm3
Boling Point	140-144°C 25mm
Specific Gravity	0.892
Sensitive	7: reacts slowly with moisture/water
Refractive Index	1.4367

2,2-双(烯丙氧基甲基)-1-三甲基氧基硅基丁烷 - Risk and Safety

Risk Codes	36/37/38 - Irritating to eyes, respiratory system and skin.
Safety Description	S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
TSCA	No

2,2-双(烯丙氧基甲基)-1-三甲基氧基硅基丁烷 - Introduction

2,2-bis(allyloxymethyl)butoxy-trimethyl-silane is an organosilicon compound with the chemical formula C14H30O4Si. The following is an introduction to its nature, use, preparation and safety information:

Nature:
-Appearance: Colorless to light yellow liquid.
-Density: about 0.905g/cm³.
-Boiling point: About 270 ° C (at 760 mmHg).
-Melting point: About -80 ° C.

Use:
- 2,2-bis(allyloxymethyl)butoxy-trimethyl-silane are commonly used in organic synthesis reactions as crosslinking agents, curing agents and modifiers.
-It can be used in the fields of polymers and coatings to improve abrasion resistance, weather resistance and yellowing resistance.
-In addition, it can also be used for surface coatings, sealants, adhesives and electronic materials.

Method:
- 2,2-bis(allyloxymethyl)butoxy-trimethyl-silane can be synthesized by partial hydrolysis of silane and addition reaction of allyl alcohol.
-In the reaction, a metal catalyst or an acid catalyst is usually used to accelerate the reaction speed, and the reaction temperature is generally carried out at room temperature.

Safety Information:
- 2,2-bis(allyloxymethyl)butoxy-trimethyl-silane may be irritating to the eyes, skin and respiratory system, and should be careful to avoid contact when using.
-When used, follow proper laboratory practices and wear appropriate protective gloves, glasses and masks.
-Do not mix it with oxidants and strong acids to avoid dangerous substances.
-It should be sealed during storage to avoid contact with air and humidity.
-When disposing of the waste of this compound, the relevant environmental regulations should be observed.

Last Update：2024-04-10 22:29:15