2,4,6-TRIBROMOANILINE - Names and Identifiers
Name | 2,4,6-Tribromoaniline
|
Synonyms | AKOS B028948 Tribromoanisole 2,4,6-Tribromoanine 2,4,6-Tribomoaniline 2,4,6-tribromo-anilin 2,4,6-TRIBROMOANILINE 2,4,6-Tribromoaniline 2,4,6-TRIBROMOBENZENAMINE 1,4,6-tribromobenzenamine 2,4,6-tribromo-benzenamin 2,4,6-Tribromobenzenamine
|
CAS | 147-82-0
|
EINECS | 205-700-1 |
InChIKey | GVPODVKBTHCGFU-UHFFFAOYSA-N |
2,4,6-TRIBROMOANILINE - Physico-chemical Properties
Molecular Formula | C6H4Br3N
|
Molar Mass | 329.81 |
Density | 2.35 |
Melting Point | 120-122°C(lit.) |
Boling Point | 300°C(lit.) |
Flash Point | 300°C |
Solubility | alcohol: soluble (cold)(lit.) |
Vapor Presure | 0.00115mmHg at 25°C |
Merck | 14,9610 |
BRN | 2209258 |
pKa | -0.23±0.10(Predicted) |
Refractive Index | 1.6890 (estimate) |
Physical and Chemical Properties |
Appearance: |
White Crystal or powder |
Melting Point: |
119-121℃ | |
Use | Used as pharmaceutical intermediates, chemical flame retardants, etc |
2,4,6-TRIBROMOANILINE - Risk and Safety
Risk Codes | R23/24/25 - Toxic by inhalation, in contact with skin and if swallowed.
R33 - Danger of cumulative effects
R36/37/38 - Irritating to eyes, respiratory system and skin.
R20/21/22 - Harmful by inhalation, in contact with skin and if swallowed.
R41 - Risk of serious damage to eyes
R38 - Irritating to the skin
|
Safety Description | S28 - After contact with skin, wash immediately with plenty of soap-suds.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
S36/37 - Wear suitable protective clothing and gloves.
S28A -
S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
|
UN IDs | UN 2811 6.1/PG 2 |
WGK Germany | 3 |
RTECS | BZ0175000 |
TSCA | Yes |
HS Code | 29214200 |
Hazard Note | Irritant |
2,4,6-TRIBROMOANILINE - Introduction
2,4,6-Tribromoaniline is an organic compound with three bromine atoms and an amine group in its molecular structure. The following is a description of the nature, use, formulation and safety information of 2,4, 6-Tribroaniline:
Nature:
-Appearance: 2,4, 6-Tribroaniline is a pale yellow to brown crystalline solid.
-Solubility: It is soluble in organic solvents such as ethanol and dichloromethane, and almost insoluble in water.
-Melting point: Its melting point is 135-138°C.
-density: its density is 2.17g/cm³.
Use:
- 2,4, 6-Tribroaniline is mainly used as a rubber accelerator to improve the heat resistance, wear resistance and aging resistance of rubber.
-It can also be used as a dye intermediate and a reagent in organic synthesis.
Method:
-The preparation method of 2,4, 6-Tribroaniline is usually obtained by reacting aniline with bromine under heating conditions. The reaction may be carried out in an organic solvent and is facilitated by appropriate catalysts and temperature control.
Safety Information:
- 2,4, 6-Tribroaniline is a flammable solid and may burn when exposed to open flames or high temperatures.
-It has a certain degree of irritation and toxicity, and should be avoided when in contact with skin and eyes.
-When using and manipulating 2,4, 6-Tribroaniline, appropriate personal protective measures should be taken, such as wearing gloves, goggles and protective clothing.
-Waste should be disposed of in accordance with local regulations to avoid environmental pollution.
Please note that when using and handling any chemical substances, always follow safe operating procedures and follow relevant regulations and guidelines.
Last Update:2024-04-09 15:16:23