2,6,10-TRIMETHYLDODECANE
2,6,10-TRIMETHYLDODECANE
CAS: 3891-98-3
Molecular Formula: C15H32
2,6,10-TRIMETHYLDODECANE - Names and Identifiers
| Name | 2,6,10-TRIMETHYLDODECANE |
| Synonyms | Farnesan FARNESANE 2,6,10-TRIMETHYLDODECANE dodecane,2,6,10-trimethyl- |
| CAS | 3891-98-3 |
2,6,10-TRIMETHYLDODECANE - Physico-chemical Properties
| Molecular Formula | C15H32 |
| Molar Mass | 212.41 |
| Density | 0.7682 g/cm3(Temp: 25 °C) |
| Boling Point | 119.5-120 °C(Press: 11 Torr) |
| Storage Condition | Room Temprature |
| Physical and Chemical Properties | EPA Chemical Information Dodecane, 2,6,10-trimethyl- (3891-98-3) |
2,6,10-TRIMETHYLDODECANE - Upstream Downstream Industry
| Raw Materials | (E,Z)-alpha-farnesene (Z,E)-ALPHA-FARNESENE 1-IODO-2-METHYLBUTANE FARNESENE FARNESOL 2-Methyl-1-butanol |
| Downstream Products | 2,6,10-TRIMETHYLUNDECANE |
2,6,10-TRIMETHYLDODECANE - Introduction
2,6,10-TRIMETHYLDODECANE(2,6,10-Trimethyldodecane) is an organic compound with the molecular formula C15H32 and the common structural formula is (CH3)3C(CH2)8CH3. Its properties are as follows:
1. Appearance: 2,6,10-TRIMETHYLDODECANE is a colorless liquid.
2. Boiling point: Its boiling point is relatively high, about 220-230 ° C. This allows it to be used as a high temperature lubricant.
3. Solubility: It has good solubility in non-polar solvents, but almost insoluble in water.
The main uses of 2,6,10-TRIMETHYLDODECANE are as follows:
1. High temperature lubricant: Due to its high boiling point and good chemical stability, it is often used as a high temperature lubricant, especially in the aerospace industry.
2. Cosmetics and Personal Care Products: 2,6,10-TRIMETHYLDODECANE can be added as a grease ingredient to cosmetics and personal care products, such as lotions, skin creams and lipsticks.
3. Chemical intermediate: It can be used as an intermediate for the synthesis of other organic compounds and used to prepare fragrances and lubricants.
The preparation method of 2,6,10-TRIMETHYLDODECANE is mainly realized by chemical synthesis, one of which is prepared by hydrogenation of dodecane, and after appropriate reaction and purification, the desired product is obtained.
Regarding safety information, 2,6,10-TRIMETHYLDODECANE is relatively safe under normal conditions of use, but the following points still need to be noted:
1. Inhalation: Long-term or large amounts of inhalation can cause respiratory irritation. Be sure to operate in a well-ventilated area and avoid prolonged contact.
2. Eye and skin contact: Avoid contact with eyes and skin. In case of contact, rinse immediately with plenty of water. If you feel unwell, you should seek medical help.
3. Toxicity: 2,6,10-TRIMETHYLDODECANE has been found to have certain toxic effects in animal experiments. Ingestion or ingestion should be avoided.
4. Storage and handling: It should be stored in a closed container, away from fire and oxidizing agents. General chemical safety practices should be followed during handling.
To sum up, 2,6,10-TRIMETHYLDODECANE is a commonly used high-temperature lubricant, which can also be used in cosmetics and personal care products. Pay attention to safety measures and follow correct operating procedures when using.
1. Appearance: 2,6,10-TRIMETHYLDODECANE is a colorless liquid.
2. Boiling point: Its boiling point is relatively high, about 220-230 ° C. This allows it to be used as a high temperature lubricant.
3. Solubility: It has good solubility in non-polar solvents, but almost insoluble in water.
The main uses of 2,6,10-TRIMETHYLDODECANE are as follows:
1. High temperature lubricant: Due to its high boiling point and good chemical stability, it is often used as a high temperature lubricant, especially in the aerospace industry.
2. Cosmetics and Personal Care Products: 2,6,10-TRIMETHYLDODECANE can be added as a grease ingredient to cosmetics and personal care products, such as lotions, skin creams and lipsticks.
3. Chemical intermediate: It can be used as an intermediate for the synthesis of other organic compounds and used to prepare fragrances and lubricants.
The preparation method of 2,6,10-TRIMETHYLDODECANE is mainly realized by chemical synthesis, one of which is prepared by hydrogenation of dodecane, and after appropriate reaction and purification, the desired product is obtained.
Regarding safety information, 2,6,10-TRIMETHYLDODECANE is relatively safe under normal conditions of use, but the following points still need to be noted:
1. Inhalation: Long-term or large amounts of inhalation can cause respiratory irritation. Be sure to operate in a well-ventilated area and avoid prolonged contact.
2. Eye and skin contact: Avoid contact with eyes and skin. In case of contact, rinse immediately with plenty of water. If you feel unwell, you should seek medical help.
3. Toxicity: 2,6,10-TRIMETHYLDODECANE has been found to have certain toxic effects in animal experiments. Ingestion or ingestion should be avoided.
4. Storage and handling: It should be stored in a closed container, away from fire and oxidizing agents. General chemical safety practices should be followed during handling.
To sum up, 2,6,10-TRIMETHYLDODECANE is a commonly used high-temperature lubricant, which can also be used in cosmetics and personal care products. Pay attention to safety measures and follow correct operating procedures when using.
Last Update：2024-04-09 20:02:46
Supplier List
Product Name: Farnesane Visit Supplier Webpage Request for quotation
CAS: 3891-98-3
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 3891-98-3
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
Product Name: Farnesane Visit Supplier Webpage Request for quotation
CAS: 3891-98-3
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 3891-98-3
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
View History
Raw Materials for 2,6,10-TRIMETHYLDODECANE
Downstream Products for 2,6,10-TRIMETHYLDODECANE