2-(2,6-Dimethyl-piperidin-1-yl)-ethylamine
2-(2,6-Dimethyl-piperidin-1-yl)-ethylamine
CAS: 1788-35-8
Molecular Formula: C9H20N2
2-(2,6-Dimethyl-piperidin-1-yl)-ethylamine - Names and Identifiers
2-(2,6-Dimethyl-piperidin-1-yl)-ethylamine - Physico-chemical Properties
| Molecular Formula | C9H20N2 |
| Molar Mass | 156.27 |
| Sensitive | Irritant |
| MDL | MFCD03701702 |
2-(2,6-Dimethyl-piperidin-1-yl)-ethylamine - Introduction
2-(2,6-dimethylpiperidin-l-yl)-ethylamine, chemical formula C10H22N2, often abbreviated as DMEA. The following is a description of the nature, use, method and safety information of DMEA:
1. nature:
-Appearance: Colorless liquid or solid.
-Solubility: Soluble in water and organic solvents, such as ethanol and ether.
-Melting point:-37°C
-Boiling Point: 184-186°C
-Density: 0.86g/cm³
-Molecular weight: 170.30g/mol
2. use:
- DMEA, as an organic compound, is mainly used as a catalyst, solvent and intermediate in organic synthesis.
-DMEA can be used as a synthetic intermediate for sunscreens, anticancer agents and antibiotics in drug synthesis.
-Can be used as a precursor for polyurethane and polyamide.
3. preparation method:
- DMEA can be prepared by the reaction of 2,6-dimethylpiperidine and ethyl chloride.
-Reaction steps:
a. Dissolve 2,6-dimethylpiperidine in a suitable solvent.
B. At low temperature, slowly drop ethyl chloride into the reaction system.
c. After completion of the reaction, the inorganic salts were extracted with saturated sodium chloride solution, the organic phase was dried and purified to a solid by evaporation of the solvent.
4. Safety Information:
-The operation of DMEA should be carried out in a well-ventilated place, avoiding inhalation of gas, dust or vapor, and avoiding contact with skin and eyes.
-Appropriate protective equipment such as gloves, goggles and protective clothing must be worn when handling DMEA.
- DMEA may be harmful to the environment, dispose and dispose of waste properly and comply with relevant regulations.
Please note that the preparation and use of chemical substances must strictly comply with relevant laboratory safety regulations and follow correct operating procedures.
1. nature:
-Appearance: Colorless liquid or solid.
-Solubility: Soluble in water and organic solvents, such as ethanol and ether.
-Melting point:-37°C
-Boiling Point: 184-186°C
-Density: 0.86g/cm³
-Molecular weight: 170.30g/mol
2. use:
- DMEA, as an organic compound, is mainly used as a catalyst, solvent and intermediate in organic synthesis.
-DMEA can be used as a synthetic intermediate for sunscreens, anticancer agents and antibiotics in drug synthesis.
-Can be used as a precursor for polyurethane and polyamide.
3. preparation method:
- DMEA can be prepared by the reaction of 2,6-dimethylpiperidine and ethyl chloride.
-Reaction steps:
a. Dissolve 2,6-dimethylpiperidine in a suitable solvent.
B. At low temperature, slowly drop ethyl chloride into the reaction system.
c. After completion of the reaction, the inorganic salts were extracted with saturated sodium chloride solution, the organic phase was dried and purified to a solid by evaporation of the solvent.
4. Safety Information:
-The operation of DMEA should be carried out in a well-ventilated place, avoiding inhalation of gas, dust or vapor, and avoiding contact with skin and eyes.
-Appropriate protective equipment such as gloves, goggles and protective clothing must be worn when handling DMEA.
- DMEA may be harmful to the environment, dispose and dispose of waste properly and comply with relevant regulations.
Please note that the preparation and use of chemical substances must strictly comply with relevant laboratory safety regulations and follow correct operating procedures.
Last Update：2024-04-09 15:18:09
