2-(Hydroxymethyl)benzeneboronicacidmonocyclicester
(2-Hydroxymethylphenyl)boronic acid, dehydrate
CAS: 87199-14-2
Molecular Formula: C7H9BO3
2-(Hydroxymethyl)benzeneboronicacidmonocyclicester - Names and Identifiers
2-(Hydroxymethyl)benzeneboronicacidmonocyclicester - Physico-chemical Properties
| Molecular Formula | C7H9BO3 |
| Molar Mass | 151.96 |
| Density | 1.25±0.1 g/cm3(Predicted) |
| Boling Point | 379.8±44.0 °C(Predicted) |
| Water Solubility | Slightly soluble in water. |
| Appearance | Solid |
| pKa | 8.48±0.58(Predicted) |
| Storage Condition | Inert atmosphere,Room Temperature |
| MDL | MFCD02258966 |
2-(Hydroxymethyl)benzeneboronicacidmonocyclicester - Risk and Safety
| Risk Codes | R36/37/38 - Irritating to eyes, respiratory system and skin. R41 - Risk of serious damage to eyes R37/38 - Irritating to respiratory system and skin. R22 - Harmful if swallowed |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36 - Wear suitable protective clothing. S39 - Wear eye / face protection. S60 - This material and its container must be disposed of as hazardous waste. S37 - Wear suitable gloves. |
| HS Code | 29163990 |
| Hazard Class | IRRITANT |
2-(Hydroxymethyl)benzeneboronicacidmonocyclicester - Introduction
(2-Hydroxymethylphenyl)boronic acid, dehydrate is an organic compound with the molecular formula C7H9BO3. The following is a description of the properties, uses, preparation and safety information of the compound:
Nature:
-Appearance:(2-Hydroxymethylphenyl)boronic acid, dehydrate colorless crystalline solid.
-Solubility: Slightly soluble in water, can be dissolved in organic solvents such as benzene and dimethyl sulfoxide.
-Melting point: about 180-185 degrees Celsius.
- pH: The pKa value of the compound is around 7.59.
Use:
- (2-Hydroxymethylphenyl)boronic acid, dehydrate is an important organic synthesis intermediate, often used in organic synthesis reactions.
-It can be used to synthesize biologically active compounds and has potential application value in the field of drug research and development.
Preparation Method:
- (2-Hydroxymethylphenyl)boronic acid, dehydrate can be obtained by the reaction of phenylboronic acid and formaldehyde. The specific synthesis method is as follows:
1. First, the reaction of phenylboronic acid with formaldehyde in an organic solvent is stirred at room temperature for a certain time.
2. After the reaction, the product is obtained by crystallization or other separation methods.
Safety Information:
-Contact: Contact (2-Hydroxymethylphenyl)boronic acid, dehydrate may cause skin irritation, direct skin contact should be avoided.
-inhalation: inhalation (2-Hydroxymethylphenyl)boronic acid, dehydrate dust or steam may cause respiratory tract irritation, should ensure good ventilation.
-ingestion: ingestion of (2-Hydroxymethylphenyl)boronic acid, dehydrate should immediately seek medical treatment, and bring the compound label or safety data sheet.
-Storage: (2-Hydroxymethylphenyl)boronic acid should be dehydrate stored in a sealed container and stored in a cool, dry place, away from fire and oxidizing agents.
Although the compound is widely used in the laboratory, you should always pay attention to safe operation and follow good laboratory practices during use. For specific applications and operations, it is recommended to refer to the relevant literature or consult a professional.
Nature:
-Appearance:(2-Hydroxymethylphenyl)boronic acid, dehydrate colorless crystalline solid.
-Solubility: Slightly soluble in water, can be dissolved in organic solvents such as benzene and dimethyl sulfoxide.
-Melting point: about 180-185 degrees Celsius.
- pH: The pKa value of the compound is around 7.59.
Use:
- (2-Hydroxymethylphenyl)boronic acid, dehydrate is an important organic synthesis intermediate, often used in organic synthesis reactions.
-It can be used to synthesize biologically active compounds and has potential application value in the field of drug research and development.
Preparation Method:
- (2-Hydroxymethylphenyl)boronic acid, dehydrate can be obtained by the reaction of phenylboronic acid and formaldehyde. The specific synthesis method is as follows:
1. First, the reaction of phenylboronic acid with formaldehyde in an organic solvent is stirred at room temperature for a certain time.
2. After the reaction, the product is obtained by crystallization or other separation methods.
Safety Information:
-Contact: Contact (2-Hydroxymethylphenyl)boronic acid, dehydrate may cause skin irritation, direct skin contact should be avoided.
-inhalation: inhalation (2-Hydroxymethylphenyl)boronic acid, dehydrate dust or steam may cause respiratory tract irritation, should ensure good ventilation.
-ingestion: ingestion of (2-Hydroxymethylphenyl)boronic acid, dehydrate should immediately seek medical treatment, and bring the compound label or safety data sheet.
-Storage: (2-Hydroxymethylphenyl)boronic acid should be dehydrate stored in a sealed container and stored in a cool, dry place, away from fire and oxidizing agents.
Although the compound is widely used in the laboratory, you should always pay attention to safe operation and follow good laboratory practices during use. For specific applications and operations, it is recommended to refer to the relevant literature or consult a professional.
Last Update：2024-04-09 21:01:54
Supplier List
Spot supply
Product Name: 2-Hydroxymethylphenylboronic Acid Visit Supplier Webpage Request for quotationCAS: 87199-14-2
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
Spot supply
Product Name: 2-Hydroxymethylphenylboronic Acid Visit Supplier Webpage Request for quotationCAS: 87199-14-2
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
View History