2-(Thien-2-yl)bromobenzene
2-(2-BROMOPHENYL)THIOPHENE
CAS: 106851-53-0
Molecular Formula: C10H7BrS
2-(Thien-2-yl)bromobenzene - Names and Identifiers
| Name | 2-(2-BROMOPHENYL)THIOPHENE |
| Synonyms | 2-(2-BROMOPHENYL)THIOPHENE 2-(Thien-2-yl)bromobenzene Thiophene, 2-(2-bromophenyl)- |
| CAS | 106851-53-0 |
| InChI | InChI=1/C10H7BrS/c11-9-5-2-1-4-8(9)10-6-3-7-12-10/h1-7H |
2-(Thien-2-yl)bromobenzene - Physico-chemical Properties
| Molecular Formula | C10H7BrS |
| Molar Mass | 239.13 |
| Density | 1.491g/cm3 |
| Boling Point | 293.494°C at 760 mmHg |
| Flash Point | 131.301°C |
| Vapor Presure | 0.003mmHg at 25°C |
| Storage Condition | 2-8°C |
| Refractive Index | 1.628 |
2-(Thien-2-yl)bromobenzene - Risk and Safety
| Risk Codes | 36 - Irritating to the eyes |
| Safety Description | 26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. |
| Hazard Note | Harmful |
2-(Thien-2-yl)bromobenzene - Introduction
2-(2 '-bromophenyl) thiophene is an organic compound whose chemical formula is C10H7BrS. The following is a description of its nature, use, formulation and safety information:
Nature:
-Appearance: 2-(2 '-Bromophenyl) thiophene is a white to yellowish crystal.
-Melting point: Its melting point is about 75-78 degrees Celsius.
-Solubility: It has a certain solubility in common organic solvents, such as dimethylformamide and dichloromethane.
Use:
-As an intermediate in organic synthesis: 2-(2 '-bromophenyl) thiophene can be used as an important intermediate in organic synthesis and used in the synthesis of other organic compounds.
-Materials Science: It can also be used as a building block for organic electronic materials, photovoltaic materials and organic optoelectronic devices.
Preparation Method:
-Observed by bromination reaction: 2-(2 '-bromophenyl) thiophene can be prepared by the reaction of thiophene and bromobenzene. Specific reaction conditions and procedures need to refer to the organic synthesis laboratory manual or literature.
Safety Information:
- 2-(2 '-Bromophenyl) thiophene has no special safety risk report under normal operating conditions.
-Avoid direct sunlight and high temperature during storage. Store in a sealed container, away from flammable materials and oxidants.
-During use, you must wear appropriate protective equipment, such as chemical goggles and gloves, to avoid contact with skin and eyes. Follow proper operating procedures and laboratory safety instructions. Operate under the ventilation conditions of the toxic gas exhaust system.
-When handling or disposing of waste, comply with local laws and regulations and follow proper environmental safety measures.
The information provided above is for reference only. In specific cases, please refer to relevant literature and chemical resources to ensure safe and correct use.
Nature:
-Appearance: 2-(2 '-Bromophenyl) thiophene is a white to yellowish crystal.
-Melting point: Its melting point is about 75-78 degrees Celsius.
-Solubility: It has a certain solubility in common organic solvents, such as dimethylformamide and dichloromethane.
Use:
-As an intermediate in organic synthesis: 2-(2 '-bromophenyl) thiophene can be used as an important intermediate in organic synthesis and used in the synthesis of other organic compounds.
-Materials Science: It can also be used as a building block for organic electronic materials, photovoltaic materials and organic optoelectronic devices.
Preparation Method:
-Observed by bromination reaction: 2-(2 '-bromophenyl) thiophene can be prepared by the reaction of thiophene and bromobenzene. Specific reaction conditions and procedures need to refer to the organic synthesis laboratory manual or literature.
Safety Information:
- 2-(2 '-Bromophenyl) thiophene has no special safety risk report under normal operating conditions.
-Avoid direct sunlight and high temperature during storage. Store in a sealed container, away from flammable materials and oxidants.
-During use, you must wear appropriate protective equipment, such as chemical goggles and gloves, to avoid contact with skin and eyes. Follow proper operating procedures and laboratory safety instructions. Operate under the ventilation conditions of the toxic gas exhaust system.
-When handling or disposing of waste, comply with local laws and regulations and follow proper environmental safety measures.
The information provided above is for reference only. In specific cases, please refer to relevant literature and chemical resources to ensure safe and correct use.
Last Update：2024-04-10 22:29:15
Supplier List
Product Name: 2-(2-BROMOPHENYL)THIOPHENE Visit Supplier Webpage Request for quotation
CAS: 106851-53-0
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 106851-53-0
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
Product Name: 2-(2-BROMOPHENYL)THIOPHENE Visit Supplier Webpage Request for quotation
CAS: 106851-53-0
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 106851-53-0
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
View History