2-CHLORO-5-IODOPHENOL - Names and Identifiers
2-CHLORO-5-IODOPHENOL - Physico-chemical Properties
Molecular Formula | C6H4ClIO
|
Molar Mass | 254.45 |
Density | 2.087±0.06 g/cm3(Predicted) |
Melting Point | 56.5 °C |
Boling Point | 277.6±25.0 °C(Predicted) |
Flash Point | 121.7°C |
Vapor Presure | 0.00265mmHg at 25°C |
pKa | 7?+-.0.10(Predicted) |
Storage Condition | Keep in dark place,Sealed in dry,Room Temperature |
Refractive Index | 1.677 |
2-CHLORO-5-IODOPHENOL - Risk and Safety
Hazard Symbols | Xi - Irritant
|
Risk Codes | R20/21/22 - Harmful by inhalation, in contact with skin and if swallowed.
R36/37/38 - Irritating to eyes, respiratory system and skin.
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
|
Hazard Note | Irritant |
2-CHLORO-5-IODOPHENOL - Introduction
2-Chloro-5-iodophenol is an organic compound with the chemical formula C6H4ClIO. The following is a description of the properties, uses, preparation and safety information of the compound:
Nature:
2-Chloro-5-iodophenol is a solid with a white to light yellow color. It is a combination of an organic halide and a phenol, and has substituents of one chlorine atom and one iodine atom on the benzene ring. It can decompose at higher temperatures.
Use:
2-choro-5-iodophenol can be used in organic synthesis reactions, for example, as an intermediate or raw material for organic synthesis. It can be used in the preparation of other organic compounds, dyes and pharmaceuticals.
Method:
The synthesis of 2-Chloro-5-iodophenol can be produced by reacting phenol with thionyl chloride to produce 2-chlorophenol, and then reacting with iodine to produce 2-Chloro-5-iodophenol.
Safety Information:
Safety precautions are required when handling 2-Chloro-5-iodophenol. It may be irritating to the skin, eyes, and respiratory tract, so wear protective gloves, goggles, and a mask. Avoid contact with skin, eyes and inhalation during operation. If you accidentally come into contact with the substance, rinse immediately with plenty of water and seek medical attention. At the same time, the laboratory experiments should follow the correct experimental procedures and safety guidelines.
Last Update:2024-04-09 21:11:58