2-Chloroethanal
Chloroacetaldehyde
CAS: 107-20-0
Molecular Formula: C2H3ClO
2-Chloroethanal - Names and Identifiers
2-Chloroethanal - Physico-chemical Properties
| Molecular Formula | C2H3ClO |
| Molar Mass | 78.4976 |
| Density | 1.117g/cm3 |
| Melting Point | -28--23℃ |
| Boling Point | 85°C at 760 mmHg |
| Vapor Presure | 70.6mmHg at 25°C |
| Refractive Index | 1.382 |
| Physical and Chemical Properties | WGK Germany:- RTECS:AB2450000 |
2-Chloroethanal - Risk and Safety
| Hazard Symbols | T+ - Very toxic N - Dangerous for the environment  |
| Risk Codes | R26 - Very Toxic by inhalation R34 - Causes burns R40 - Limited evidence of a carcinogenic effect R50 - Very Toxic to aquatic organisms |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S28 - After contact with skin, wash immediately with plenty of soap-suds. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S61 - Avoid release to the environment. Refer to special instructions / safety data sheets. |
| UN IDs | UN 2232 |
2-Chloroethanal - Nature
Open Data Verified Data
A flammable and toxic liquid with a pungent and pungent odor. Boiling point 85 degrees C (85~86 degrees C). Flash point 87. 78 °c. Soluble in water, ether, methanol, acetone, etc. 40% aqueous solution is colorless transparent liquid, relative density 1. 19, boiling point 99~100 ℃, freezing point -16.3 ℃, refractive index 1.397. When the concentration is more than 50% in water, the semi-aqueous platelets are precipitated. Semi-hydrate melting point of 43~50 ℃, boiling point of 85.5 ℃ (decomposition into water and chloroacetaldehyde), soluble in water, ethanol ether.
Last Update：2024-01-02 23:10:35
2-Chloroethanal - Preparation Method
Open Data Verified Data
chlorine and vinyl chloride were reacted in an oxidation column for 6 to 7 hours. When the content of chloroacetaldehyde reached 10%, the reaction was terminated, and then trichloroethane, a by-product, was separated to obtain an aqueous solution of chloroacetaldehyde.
Last Update：2022-01-01 10:16:48
2-Chloroethanal - Use
Open Data Verified Data
mainly used in organic synthesis, such as the preparation of sulfathiazole and fungicides. It is also used to make the trunk easy to peel.
Last Update：2022-01-01 10:16:47
2-Chloroethanal - Safety
Open Data Verified Data
toxic, acid corrosive, irritating to the skin and mucous membranes. The maximum allowable concentration in the air is 3mg/m3, the production site should be strengthened ventilation, equipment should be closed. The operator should wear protective gear. Packing in strong acid corrosion resistant container. According to the provisions of toxic and strong corrosive chemicals storage and transportation.
Last Update：2022-01-01 10:16:48
Supplier List
Spot supply
Product Name: Chloroacetaldehyde Request for quotationCAS: 107-20-0
Tel: +86-17551318830
Email: r@reformchem.com
Mobile: +86-17551318830
QQ: 3787852685
Spot supply
Product Name: Chloroacetaldehyde Request for quotationCAS: 107-20-0
Tel: +86-17551318830
Email: r@reformchem.com
Mobile: +86-17551318830
QQ: 3785839865
Spot supply
Product Name: Chloroacetaldehyde Request for quotationCAS: 107-20-0
Tel: +86-17551318830
Email: r@reformchem.com
Mobile: +86-17551318830
QQ: 3787852685
Spot supply
Product Name: Chloroacetaldehyde Request for quotationCAS: 107-20-0
Tel: +86-17551318830
Email: r@reformchem.com
Mobile: +86-17551318830
QQ: 3785839865
View History