2-Propoxyethylamine - Names and Identifiers
2-Propoxyethylamine - Physico-chemical Properties
Molecular Formula | C5H13NO
|
Molar Mass | 103.16 |
Density | 0,85 g/cm3 |
Boling Point | 126 °C |
Flash Point | 31℃ |
pKa | 8.89±0.10(Predicted) |
Storage Condition | Room Temprature |
Refractive Index | 1.4126 |
MDL | MFCD00047955 |
2-Propoxyethylamine - Risk and Safety
Hazard Symbols | Xn - Harmful
|
Risk Codes | R11 - Highly Flammable
R34 - Causes burns
R41 - Risk of serious damage to eyes
R22 - Harmful if swallowed
|
Safety Description | S16 - Keep away from sources of ignition.
S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
S39 - Wear eye / face protection.
|
UN IDs | 2733 |
Hazard Class | 3/8 |
Packing Group | III |
2-Propoxyethylamine - Upstream Downstream Industry
2-Propoxyethylamine - Introduction
2-AMINOETHYL ETHER(2-AMINOETHYL ETHER) is an organic compound with the chemical formula C6H15NO. It is a colorless liquid with a special smell.
2-AMINOETHYL PROPYL ETHER is mainly used as a reagent and catalyst in organic synthesis reactions. For example, it can be used in the synthesis of amine compounds, quaternary ammonium salts, condensation polymers and the like. In addition, it can also be used in surfactants, membrane materials, electrochemical fields, etc.
The method for preparing 2-AMINOETHYL PROPYL ETHER is generally obtained by reacting 2-AMINOETHYL ETHER with a propoxy halogenated hydrocarbon. The specific step is to heat 2-AMINOETHYL ETHER with propoxy halogenated hydrocarbon in an appropriate solvent to produce 2-AMINOETHYL PROPYL ETHER.
Regarding the safety information of 2-AMINOETHYL PROPYL ETHER, the following points should be noted:
1. The compound is irritating and corrosive. Avoid contact with skin, eyes and respiratory tract. Wear appropriate protective gloves, goggles and face shields when handling.
2. Avoid inhaling its vapor or dust, and operate in a well-ventilated place.
3. In the use of the process should pay attention to prevent the accumulation of fire and electrostatic charge, in order to avoid fire or explosion.
4. Should be properly sealed after use, away from the fire and oxidant.
It is important to emphasize that the use of any chemical should be carried out under safe laboratory conditions and follow correct operating procedures and personal protective measures.
Last Update:2024-04-10 22:29:15