Molecular Formula | C8H14N2O4 |
Molar Mass | 202.21 |
Density | 1.027 g/mL at 25 °C (lit.) |
Melting Point | 3-5 °C |
Boling Point | 75 °C/0.25 mmHg (lit.) |
Flash Point | 223°F |
Water Solubility | insoluble |
Solubility | Chloroform (Slightly), Ethyl Acetate (Slightly) |
Vapor Presure | 1.04 hPa (20 °C) |
Appearance | Liquid |
Color | Clear to slightly turbid yellow-orange to red |
BRN | 1912326 |
Storage Condition | Store below +30°C. |
Sensitive | Light Sensitive |
Refractive Index | n20/D 1.420(lit.) |
Physical and Chemical Properties | Density 1.02 melting point 3-5°C boiling point 75°C (0.2 mmHg) refractive index 1.418-1.422 flash point 106°C water-soluble insoluble |
Use | Used as a dye intermediate |
Risk Codes | R36/38 - Irritating to eyes and skin. R51/53 - Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R5 - Heating may cause an explosion R43 - May cause sensitization by skin contact R36/37/38 - Irritating to eyes, respiratory system and skin. R11 - Highly Flammable R48/20/22 - R40 - Limited evidence of a carcinogenic effect |
Safety Description | S36 - Wear suitable protective clothing. S61 - Avoid release to the environment. Refer to special instructions / safety data sheets. S47A - S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. S29 - Do not empty into drains. S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S16 - Keep away from sources of ignition. S60 - This material and its container must be disposed of as hazardous waste. S36/37 - Wear suitable protective clothing and gloves. |
UN IDs | UN 3082 9/PG 3 |
WGK Germany | 1 |
FLUKA BRAND F CODES | 4.10-8 |
HS Code | 29270000 |
Hazard Note | Harmful/Irritant |
Hazard Class | 9 |
Packing Group | III |
product description | diisopropyl azodicarboxylate (English Diisopropyl azodicarboxylate;Diisopropyl azodiformate referred to as DIAD; The foaming agent DIPA) belongs to diisopropyl azo hydroxy salt. It is an orange-red transparent oily liquid at room temperature, has a special smell, is soluble in almost all organic solvents and plasticizers, is insoluble in water, is soluble in general plasticizers, has good mutual solubility with plastics, and has good thermal stability. Stable storage. The decomposition product is colorless, non-toxic, non-polluting, non-spraying frost, and no odor. High gas volume can be obtained in the range of 40~120 ℃. It is a liquid foaming agent for vinyl resin and can be used to make light-colored vinyl foam. With uniform microporous structure, closed-cell or open-cell foam can be obtained depending on the formula and processing conditions. In addition, it is also used as pharmaceutical intermediates, organic synthesis reagents, etc. |
uses | DIAD can be used as dye intermediates, pharmaceutical intermediates, organic synthetic reagents, rubber and plastic liquid foaming agents, etc. Diisopropyl azodicarboxylate is used as a liquid foaming agent for vinyl resin. Can be used to make light vinyl foam. With uniform microporous structure, closed-cell or open-cell foam can be obtained depending on the formula and processing conditions. In addition, it is also used as pharmaceutical intermediates, organic synthesis reagents, etc. high gas volume can be obtained in the range of 40~120 ℃. Can be used to make light vinyl foam. With uniform microporous structure, closed-cell or open-cell foam can be obtained depending on the formula and processing conditions. Used as a liquid foaming agent for vinyl resins. Can be used to make light vinyl foam. Also used as a pharmaceutical intermediate. Reacts with 1,3, 2-dioxophosphate heterocyclohexane under the action of iron catalyst to form a rearranged phosphorus ylide product |