Name | Poly(styrene sulfonic acid) |
Synonyms | Tolevamer PL-SO3H RESIN Tolevamer [INN] PL-SO3H MP-RESIN Polystyrene sulfonate SULFONATED POLYSTYRENE Polystyrene sulfonic acid Poly(styrene sulfonic acid) POLY(4-STYRENESULFONIC ACID) STYRENESULFONIC ACID POLYMER 4-ethenyl-benzenesulfonicacihomopolymer 4-Ethenylbenzenesulfonic acid homopolymer Benzenesulfonicacid,4-ethenyl-,homopolymer MACROPOROUS POLYMER SUPPORTED SULFONIC ACID Benzenesulfonic acid, 4-ethenyl-, homopolymer |
CAS | 28210-41-5 |
EINECS | 411-200-6 |
InChI | InChI=1/C8H8O3S.Ca/c1-2-7-5-3-4-6-8(7)12(9,10)11;/h2-6H,1H2,(H,9,10,11);/q;+2/p-1 |
Molecular Formula | C8H8O3S |
Molar Mass | 184.21 |
Density | 1.11g/mLat 25°C |
Melting Point | 1°C |
Boling Point | 100°C |
Water Solubility | Miscible with water, ethanol, methanol, lower alcohols and glycols. |
Solubility | H2O: soluble |
Appearance | Liquid |
Color | Amber |
Exposure Limit | ACGIH: TWA 0.2 mg/m3OSHA: TWA 1 mg/m3NIOSH: IDLH 15 mg/m3; TWA 1 mg/m3 |
PH | 1.55 (25℃) |
Storage Condition | Sealed in dry,Room Temperature |
Refractive Index | n20/D 1.3718 |
MDL | MFCD00165973 |
Hazard Symbols | C - Corrosive |
Risk Codes | R34 - Causes burns R35 - Causes severe burns |
Safety Description | S23 - Do not breathe vapour. S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) |
UN IDs | UN 2586 8/PG 3 |
WGK Germany | - |
TSCA | Yes |
Hazard Class | 8 |
EPA chemical information | Information provided by: ofmpub.epa.gov (external link) |
Use | Poly (p-styrene sulfonic acid) is a polymer used as a hole injection electrode in polymer-based light-emitting devices. Applied to reactive emulsifiers, water-soluble polymers, water treatment agents, etc. Polyelectrolyte; conductive and anti-static resin for electrical recording and electrophotographic substrates |