3,3-Dimethyloctane - Names and Identifiers
3,3-Dimethyloctane - Physico-chemical Properties
Molecular Formula | C10H22
|
Molar Mass | 142.28 |
Density | 0,74 g/cm3 |
Melting Point | -53.99°C |
Boling Point | 161°C |
Flash Point | 161°C |
Water Solubility | 85.34ug/L(temperature not stated) |
Vapor Presure | 3.02mmHg at 25°C |
Appearance | clear liquid |
Color | Colorless to Almost colorless |
Storage Condition | Room Temprature |
Refractive Index | 1.4140-1.4160 |
MDL | MFCD00048874 |
3,3-Dimethyloctane - Risk and Safety
Risk Codes | R10 - Flammable
R36/37/38 - Irritating to eyes, respiratory system and skin.
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36 - Wear suitable protective clothing.
|
UN IDs | 3295 |
Hazard Class | 3 |
Packing Group | III |
3,3-Dimethyloctane - Introduction
3,3-Dimethyloctane(3,3-Dimethyloctane) is an organic compound with the chemical formula C10H22, which belongs to the alkane group. The following is a description of some properties, uses, formulation and safety information about 3,3-dimethyloctane:
Nature:
-Appearance: colorless liquid
-Boiling point: approx. 160°C
-Density: approx. 0.7g/cm³
-Solubility: almost insoluble in water, soluble in organic solvents such as ethanol, ether
-Ignition point: approx. 25°C
Use:
- 3,3-Dimethyloctane is often used as an organic solvent in chemical laboratories, which can be used to dissolve or dilute organic compounds.
-Due to its low ignition point and higher combustion temperature, it can also be used as a fuel additive.
Preparation Method:
- 3,3-Dimethyloctane can be synthesized by reacting phosphorus octachloride (PCl8) and cyclohexanone with subsequent dehydration.
Safety Information:
- 3,3-Dimethyloctane has low toxicity, but it is still necessary to pay attention to safe use and storage.
-Keep away from open flames and high-temperature heat sources when in use to prevent fire or explosion.
-When used in a confined space, ensure good ventilation to avoid harmful concentrations caused by the accumulation of steam.
-In case of contact with skin or eyes, rinse immediately with plenty of water and seek medical help if necessary.
Please note that the information provided by me is for reference only. Users should carefully read the relevant safety data before practical application and follow the corresponding laboratory operation and safety regulations.
Last Update:2024-04-10 22:29:15