3-AMINO-2-METHYLACRYLALDEHYDE - Names and Identifiers
3-AMINO-2-METHYLACRYLALDEHYDE - Physico-chemical Properties
Molecular Formula | C4H7NO
|
Molar Mass | 85.1 |
Density | 0.956g/cm3 |
Melting Point | 101 °C |
Boling Point | 278.5°C at 760 mmHg |
Flash Point | 122.3°C |
Vapor Presure | 0.00424mmHg at 25°C |
Storage Condition | 2-8°C |
Refractive Index | 1.456 |
3-AMINO-2-METHYLACRYLALDEHYDE - Risk and Safety
Hazard Symbols | Xi - Irritant
|
Risk Codes | R20/21/22 - Harmful by inhalation, in contact with skin and if swallowed.
R34 - Causes burns
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
|
UN IDs | 2923 |
Hazard Note | Irritant |
3-AMINO-2-METHYLACRYLALDEHYDE - Introduction
It is an organic compound with the chemical formula C4H7NO. The following is a detailed description of the properties, uses, preparation and safety information of the compound:
Nature:
-Appearance: It is a colorless or light yellow liquid.
-Solubility: It can be dissolved in water, and can also be dissolved with many organic solvents such as alcohol, ether, etc.
-Reactivity: It is an α,β-unsaturated aldehyde with electrophilicity, which can participate in a variety of addition and condensation reactions. Its molecule contains an amine group, which can react with an acid to form the corresponding salt under acidic conditions.
Use:
-Chemical synthesis: It can be used as an intermediate in organic synthesis to prepare other compounds, such as drugs, dyes and pesticides.
-Biochemical research: It can also be used in biochemical research as an important intermediate in the glycine metabolic pathway.
Method:
The preparation of calcium is usually achieved through organic synthetic chemical reactions, and the specific synthetic route will vary depending on the desired target compound.
Safety Information:
-is a chemical that should be handled and stored in accordance with safe operating procedures.
-This compound can enter the body through inhalation, skin contact and ingestion.
-Contact with skin may cause irritation or allergic reactions. Appropriate protective measures should be taken during operation, such as wearing protective gloves, goggles and laboratory clothing.
-If accidentally inhaled or ingested, seek medical help immediately and provide chemical name, chemical formula and relevant safety information.
When using the salt, it is recommended to operate under the guidance of experienced or safety professionals to ensure the safety of the operation process and the use environment.
Last Update:2024-04-09 19:05:48