3-FLUORO-4-METHYLBENZYLAMINE - Names and Identifiers
3-FLUORO-4-METHYLBENZYLAMINE - Physico-chemical Properties
Molecular Formula | C8H10FN
|
Molar Mass | 139.17 |
Density | 1.05 |
Boling Point | 198.0±25.0 °C(Predicted) |
Flash Point | 82.4°C |
Vapor Presure | 0.368mmHg at 25°C |
pKa | 8.95±0.10(Predicted) |
Storage Condition | Room Temprature |
Sensitive | Air Sensitive |
Refractive Index | 1.5155 |
MDL | MFCD01631531 |
3-FLUORO-4-METHYLBENZYLAMINE - Risk and Safety
Hazard Symbols | C - Corrosive
|
Risk Codes | 36/37/38 - Irritating to eyes, respiratory system and skin.
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
|
UN IDs | 2735 |
Hazard Note | Corrosive |
Hazard Class | 8 |
Packing Group | III |
3-FLUORO-4-METHYLBENZYLAMINE - Introduction
It is an organic compound with the chemical formula C8H9FN. The following is a description of its nature, use, preparation and safety information:
Properties: It is a colorless to yellowish liquid. It has a fragrant smell. It has a density of about 1.06g/cm3 and a boiling point of 200-203°C. The molecular weight of this compound is 135.16. It is a strong basic amine compound.
Usage: It can be used as an intermediate in organic synthesis. It can participate in a variety of organic synthesis reactions, such as amination reaction, nucleophilic substitution reaction and so on. This compound can also be used to prepare other compounds as synthetic raw materials for pharmaceuticals, pesticides, etc.
preparation method: 4-fluorophenylacetic acid (3-Fluorobenzoic acid) can be first protected (for example, using anhydride), and then obtained by reduction, amination and other reactions. The specific preparation method will vary according to a specific synthetic route and can be selected according to requirements.
Safety information: The safety of the PC has not been fully evaluated. General laboratory safety practices should be followed when using or handling this compound. It can be irritating and corrosive and can be harmful to the eyes, skin and respiratory system. Therefore, in contact with this compound, appropriate protective measures should be taken, such as wearing protective glasses, gloves and protective masks.
Last Update:2024-04-09 20:48:19