Name | m-Phenetidine |
Synonyms | M-PHENETIDINE m-Phenetidine 3-Ethoxyaniline 3-ETHOXYANILINE 3'-AMINOPHENETOL Meta-Phenetidine 3-ETHOXYBENZENAMINE 3-Ethoxybenzenamine |
CAS | 621-33-0 |
EINECS | 210-680-2 |
Molecular Formula | C8H11NO |
Molar Mass | 137.18 |
Density | 1.032g/mLat 25°C(lit.) |
Melting Point | 204 °C |
Boling Point | 248°C(lit.) |
Flash Point | >230°F |
Water Solubility | 0.1-0.5 g/100 mL at 20 ºC |
Vapor Presure | 0.0209mmHg at 25°C |
Appearance | Liquid |
Color | Clear brown |
BRN | 971028 |
pKa | 4.18(at 25℃) |
Storage Condition | Store below +30°C. |
Stability | Stable. Combustible. Incompatible with strong oxidizing agents, acids, acid chlorides, acid anhydrides. Sensitive to prolonged exposure to light and air. |
Refractive Index | n20/D 1.566(lit.) |
Physical and Chemical Properties | Colorless oily liquid. Boiling point 248 ℃,167-169 ℃(12.93kPa),127-128 ℃(1.47kPa), relative density 1.032, refractive index 1.5655. Soluble in alcohol and ether, slightly soluble in water, turning brown in light and air. |
Hazard Symbols | T - Toxic |
Risk Codes | R23/24/25 - Toxic by inhalation, in contact with skin and if swallowed. R33 - Danger of cumulative effects |
Safety Description | S28 - After contact with skin, wash immediately with plenty of soap-suds. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S36/37 - Wear suitable protective clothing and gloves. S28A - |
UN IDs | UN 2311 6.1/PG 3 |
WGK Germany | 3 |
RTECS | SI5400000 |
FLUKA BRAND F CODES | 8-10-23 |
HS Code | 29222200 |
Hazard Class | 6.1(b) |
Packing Group | III |
Toxicity | mma-sat 1 mg/plate EMMUEG 11(Suppl12),1,88 |
Chemical properties | colorless oily liquid. Boiling point 248 ℃,167-169 ℃(12.93kPa),127-128 ℃(1.47kPa), relative density 1.032, refractive index 1.5655. Soluble in alcohol and ether, slightly soluble in water, light and air into a brown yellow. |
Use | for organic synthesis. |
production method | from M-aminophenol by acetylation, alkylation, hydrolysis, neutralization. 1. Acetylation M-aminophenol was added to acetic acid and heated to reflux for 8H. After the acetic acid was recovered, the mixture was water-separated, cooled, and then filtered to obtain acetaminophen ([621-42-1]). 2. Alkylation ethanol, sodium hydroxide, M-acetaminophen and bromoethane were added into the reactor, heated and refluxed for 8H, poured into water, cooled and filtered to obtain m-acetamidophenyl ether. 3. Hydrolysis, neutralization M-acetamidophenylether was mixed with industrial hydrochloric acid, heated in a water bath for 8H, then poured into water and neutralized to alkalinity with 40% sodium hydroxide. The oil layer was separated. The aqueous solution was extracted with ether, and the ether was recovered and then distilled under reduced pressure together with the oil layer. Under the protection of nitrogen, a fraction of 140-144 ° C. (2.0kPa), I .e., M-ethoxyaniline, was collected. |
category | toxic substances |
toxicity grade | poisoning |
flammability hazard characteristics | open flame flammable; Toxic aniline gas emitted by heat |
storage and transportation characteristics | The warehouse is ventilated and dried at low temperature; It is stored and transported separately from food raw materials |
fire extinguishing agent | water, carbon dioxide, sand, dry powder |
NIST chemical information | information provided by: webbook.nist.gov (external link) |
EPA chemical substance information | information is provided by: ofmpeb.epa.gov (external link) |