Name | 2,5-Dimethoxy-2,5-dihydrofuran, mixture ofcis and trans |
Synonyms | DMDF 2,5-DIMETH DiMethoxy-2,5-dihydro 2,5-Dimethoxy-2,5-dihydrofuran 2,5-Dihydro-2,5-dimethoxyfuran 2,5-Dihydro-2,5-dimethoxyfuran, DMDF (2R,5S)-2,5-dimethoxy-2,5-dihydrofuran (2S,5S)-2,5-dimethoxy-2,5-dihydrofuran (2R,5R)-2,5-dimethoxy-2,5-dihydrofuran 2,5-DIHYDRO-2,5-DIMETHOXYFURAN (MIXTURE 2,5-Dimethoxy-2,5-dihydrofuran, mixture ofcis and trans 2,5-Dimethoxy-2,5-dihydrofuran (cis- and trans- mixture) |
CAS | 332-77-4 |
EINECS | 206-367-5 |
InChI | InChI=1/C6H10O3/c1-7-5-3-4-6(8-2)9-5/h3-6H,1-2H3/t5-,6-/m0/s1 |
InChIKey | WXFWXFIWDGJRSC-UHFFFAOYSA-N |
Molecular Formula | C6H10O3 |
Molar Mass | 130.14 |
Density | 1.073g/mLat 25°C(lit.) |
Boling Point | 160-162°C(lit.) |
Flash Point | 117°F |
Solubility | 368g/l |
Vapor Presure | 3.02mmHg at 25°C |
Appearance | Liquid |
Color | Clear |
BRN | 113225 |
PH | 6-7 (200g/l, H2O, 20℃) |
Storage Condition | Store below +30°C. |
Explosive Limit | 1.1-18.3%(V) |
Refractive Index | n20/D 1.434(lit.) |
Physical and Chemical Properties | The boiling point is 160-162 ℃,56-60 ℃(2.0kPa), the relative density is 1.073, the refractive index is 1.4339, and the flash point is 47 ℃. |
Hazard Symbols | Xn - Harmful |
Risk Codes | 10 - Flammable |
Safety Description | S16 - Keep away from sources of ignition. S29 - Do not empty into drains. S33 - Take precautionary measures against static discharges. S24/25 - Avoid contact with skin and eyes. |
UN IDs | UN 1993 3/PG 3 |
WGK Germany | 1 |
TSCA | Yes |
HS Code | 29321900 |
Hazard Class | 3 |
Packing Group | III |
NIST chemical information | Information provided by: webbook.nist.gov (external link) |
EPA chemical information | Information provided by: ofmpub.epa.gov (external link) |
use | this product is an intermediate for the production of atropine sulfate and anisodamine hydrobromide by synthetic method. 2, 5-dimethoxydihydrofuran is hydrolyzed with hydrochloric acid to produce 2-hydroxy-1, 4-succinaldehyde; hydrogenation and then hydrolysis to obtain succinaldehyde. Used as a pharmaceutical intermediate |
production method | obtained by etherification and reduction of furan. The reaction is carried out in an electrolytic cell. Add methanol and ammonium bromide to the electrolytic cell and stir until ammonium bromide is dissolved. When the solution is cooled to 0 ℃, furan is added, the electrolyzer is closed and cooled to below -5 ℃, the input current of the electrolysis circuit is turned on, the voltage is gradually adjusted to about 15V after normal operation, the current is 40-45A, and the electrolysis temperature is controlled at 0-5 ℃. After the electrolysis, stop stirring, suck the electrolyte to the methanol recovery pot, and alkalize. Then heat to remove ammonia gas, steam out methanol, until the gas phase temperature reaches 65 ℃ when the methanol recovery is completed. Cooling, filtration, fractionation of the filtrate, collection of 152-164 ℃ positive boiling point fraction, that is, 2, 5-dimethoxydihydrofuran. |