Molecular Formula | C6H3ClN2 |
Molar Mass | 138.55 |
Density | 1.33±0.1 g/cm3(Predicted) |
Melting Point | 116-120°C(lit.) |
Boling Point | 105-107°C 1mm |
Flash Point | 105-107°C/1mm |
Solubility | Ethanol |
Vapor Presure | 0.0474mmHg at 25°C |
Appearance | Yellow to brown crystals |
BRN | 113867 |
pKa | -3.56±0.10(Predicted) |
Storage Condition | Keep in dark place,Sealed in dry,Room Temperature |
Refractive Index | 1.565 |
MDL | MFCD00084941 |
Physical and Chemical Properties | 2-chloro-5-cyanopyridine is colorless crystal, m.p.116 ~ 117 ℃, insoluble in water, soluble in carbon tetrachloride, toluene and other solvents. |
Risk Codes | R20/21/22 - Harmful by inhalation, in contact with skin and if swallowed. R36/37/38 - Irritating to eyes, respiratory system and skin. |
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36 - Wear suitable protective clothing. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. S37 - Wear suitable gloves. |
UN IDs | 3276 |
WGK Germany | 3 |
HS Code | 29333990 |
Hazard Note | Toxic |
Hazard Class | 6.1 |
Packing Group | III |
preparation | using 2-chloro -5-trichloromethylpyridine and ammonium chloride as raw materials, the weight ratio of 2-chloro -5-trichloromethylpyridine and ammonium chloride is 1:1.1~1:3, under the catalysis of the catalyst, the reaction temperature is between 100 and 250 ℃, and the reaction time is 1 to 18 hours to generate 2-chloro-5-cyanopyridine. |
chemical properties | 2-chloro -5-cyanopyridine is colorless crystal, m.p.116 ~ 117 ℃, insoluble in water, soluble in carbon tetrachloride, toluene and other solvents. |
use | 2-chloro-5-cyanopyridine is an intermediate of the insecticides imidacloprid and acetamiprid. |
production method | its preparation method is to dissolve 3-cyanopyridine in carbon tetrachloride, add a little potassium carbonate aqueous solution, stir at room temperature, illuminate with high-pressure mercury lamp, pass in chlorine gas, finish passing through chlorine gas, delaminate, wash the carbon tetrachloride layer with potassium carbonate aqueous solution, wash with water, evaporate carbon tetrachloride, the product is obtained with 85% content and recrystallized to obtain pure product. |