34189-75-8 - Names and Identifiers
34189-75-8 - Physico-chemical Properties
Molecular Formula | C2H5Br
|
Molar Mass | 110.98 |
Density | 1.487g/mLat 25°C |
Melting Point | −119°C(lit.) |
Boling Point | 37-40°C(lit.) |
Flash Point | −10°F |
Storage Condition | 2-8°C |
Refractive Index | n20/D 1.4235(lit.) |
34189-75-8 - Risk and Safety
Risk Codes | R45 - May cause cancer
R11 - Highly Flammable
R20/21/22 - Harmful by inhalation, in contact with skin and if swallowed.
R36/37/38 - Irritating to eyes, respiratory system and skin.
R40 - Limited evidence of a carcinogenic effect
R20/22 - Harmful by inhalation and if swallowed.
|
Safety Description | S53 - Avoid exposure - obtain special instructions before use.
S16 - Keep away from sources of ignition.
S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
S36/37 - Wear suitable protective clothing and gloves.
|
UN IDs | UN 1891 6.1/PG 2 |
WGK Germany | 3 |
34189-75-8 - Introduction
Bromoethane-13C2 is a bromoethane containing the 13C isotope. Its chemical formula is CH3CH13CH2Br. The following is a description of the nature, use, manufacture and safety information of the Bromoethane-13C2:
Nature:
-Appearance: colorless liquid
-Density: approx. 1.56g/cm³
-Boiling point: about 38-39 ° C
-Melting Point: About -119-117 ° C
Use:
- Bromoethane-13C2 are often used as labeled compounds for isotope tracing experiments in research and analysis.
-It can also be used as a chemical reagent in organic synthesis.
Method:
The preparation process of Bromoethane-13C2 is usually obtained by iodide exchange reaction. First, ethyl bromide is reacted with silver isocyanate to obtain a diisocyanate. Subsequently, The diisocyanate is converted to the corresponding dicyano salt by an iodination reaction and finally by an exchange reaction with methyl chloride to form Bromoethane-13C2.
Safety Information:
- Bromoethane-13C2 is a flammable liquid and should be stored in a well-ventilated place, away from fire and heat sources.
-Wear appropriate protective gloves and goggles during use or storage.
-Contact with Bromoethane-13C2 may cause irritation to the skin, eyes and respiratory tract, so direct contact should be avoided.
-If inhaled or ingested by mistake, seek medical attention immediately.
Last Update:2024-04-10 22:29:15