351003-45-7
2-Bromo-4-fluorobenzenesulfonyl chloride
CAS: 351003-45-7
Molecular Formula: C6H3BrClFO2S
351003-45-7 - Names and Identifiers
| Name | 2-Bromo-4-fluorobenzenesulfonyl chloride |
| Synonyms | WSGR DF BE CHROMAN-2-CARBOXYLIC ACID ETHYL ESTER 2-Bromo-4-fluorobenzenesulfonyl chloride 2-Bromo-4-fluoro-benzenesulfonylchloride 2-BROMO-4-FLUOROBENZENESULFONYL CHLORIDE 4-FLUORO-2-BROMOBENZENESULFONYL CHLORIDE 2-BROMO-4-FLUOROBENZENESULPHONYL CHLORIDE 2-Bromo-4-fluorobenzenesulphonyl chloride ethyl 3,4-dihydro-2H-chromene-2-carboxylate |
| CAS | 351003-45-7 |
| EINECS | 625-522-1 |
| InChI | InChI=1/C12H14O3/c1-2-14-12(13)11-8-7-9-5-3-4-6-10(9)15-11/h3-6,11H,2,7-8H2,1H3 |
351003-45-7 - Physico-chemical Properties
| Molecular Formula | C6H3BrClFO2S |
| Molar Mass | 273.51 |
| Density | 1.870g/mLat 25°C(lit.) |
| Melting Point | 37-39°C |
| Boling Point | 264-265°C(lit.) |
| Flash Point | 95°F |
| Water Solubility | Hydrolyzes in water. |
| Vapor Presure | 0.001mmHg at 25°C |
| Sensitive | Moisture Sensitive |
| Refractive Index | n20/D 1.5780(lit.) |
351003-45-7 - Risk and Safety
| Hazard Symbols | C - Corrosive |
| Risk Codes | R10 - Flammable R34 - Causes burns |
| Safety Description | S16 - Keep away from sources of ignition. S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) |
| UN IDs | UN 2920 8/PG 2 |
| WGK Germany | 3 |
| HS Code | 29049090 |
| Hazard Note | Corrosive |
| Hazard Class | 8 |
| Packing Group | III |
351003-45-7 - Introduction
chloride is a chemical substance with a chemical formula of C6H3BrClFOS. The following is a description of some of the properties, uses, methods and safety information of the chloride:
Nature:
-Appearance: Colorless or light yellow solid
-Melting point: 65-69 degrees Celsius
-Boiling point: 254 degrees Celsius
-Density: 1.77g/cm³
Use:
-chloride is an important organic synthesis intermediate, commonly used in organic synthesis reactions.
-It can be used to prepare a variety of amide compounds, acid chloride derivatives and other organic compounds.
Preparation Method:
-chloride can be obtained by reacting benzenesulfonyl chloride with 2-bromo-4-fluoroaniline under appropriate conditions.
Safety Information:
-chloride is an organic compound that is irritating and corrosive.
-Wear appropriate protective equipment when using, including safety glasses, gloves and lab coats.
-Avoid inhaling dust, smoke or gases and ensure that you operate in a well-ventilated environment.
-In use, storage and handling, should follow the relevant safety procedures.
-Avoid contact with skin, eyes and mucous membranes during treatment, and ensure adequate cleaning of affected areas.
-If you come into contact with the compound, wash it immediately with plenty of water and seek medical help.
In addition, for specific chemical operations and applications, it is recommended to understand in detail and follow relevant safety regulations and laboratory operating guidelines before proceeding.
Nature:
-Appearance: Colorless or light yellow solid
-Melting point: 65-69 degrees Celsius
-Boiling point: 254 degrees Celsius
-Density: 1.77g/cm³
Use:
-chloride is an important organic synthesis intermediate, commonly used in organic synthesis reactions.
-It can be used to prepare a variety of amide compounds, acid chloride derivatives and other organic compounds.
Preparation Method:
-chloride can be obtained by reacting benzenesulfonyl chloride with 2-bromo-4-fluoroaniline under appropriate conditions.
Safety Information:
-chloride is an organic compound that is irritating and corrosive.
-Wear appropriate protective equipment when using, including safety glasses, gloves and lab coats.
-Avoid inhaling dust, smoke or gases and ensure that you operate in a well-ventilated environment.
-In use, storage and handling, should follow the relevant safety procedures.
-Avoid contact with skin, eyes and mucous membranes during treatment, and ensure adequate cleaning of affected areas.
-If you come into contact with the compound, wash it immediately with plenty of water and seek medical help.
In addition, for specific chemical operations and applications, it is recommended to understand in detail and follow relevant safety regulations and laboratory operating guidelines before proceeding.
Last Update：2024-04-10 22:29:15
Supplier List
Spot supply
Product Name: 2-Bromo-4-fluorobenzenesulfonyl chloride Request for quotationCAS: 351003-45-7
Tel: +86-17551318830
Email: r@reformchem.com
Mobile: +86-17551318830
QQ: 3787852685
Spot supply
Product Name: 2-Bromo-4-fluorobenzenesulfonyl chloride Request for quotationCAS: 351003-45-7
Tel: +86-17551318830
Email: r@reformchem.com
Mobile: +86-17551318830
QQ: 3785839865
Spot supply
Product Name: 2-Bromo-4-fluorobenzenesulfonyl chloride Request for quotationCAS: 351003-45-7
Tel: 17505222756
Email: pules.cn@gmail.com
Mobile: +86-17551318830
Wechat: 17505222756
Spot supply
Product Name: 2-Bromo-4-fluorobenzenesulfonyl chloride Request for quotationCAS: 351003-45-7
Tel: +86-17551318830
Email: r@reformchem.com
Mobile: +86-17551318830
QQ: 3787852685
Spot supply
Product Name: 2-Bromo-4-fluorobenzenesulfonyl chloride Request for quotationCAS: 351003-45-7
Tel: +86-17551318830
Email: r@reformchem.com
Mobile: +86-17551318830
QQ: 3785839865
Spot supply
Product Name: 2-Bromo-4-fluorobenzenesulfonyl chloride Request for quotationCAS: 351003-45-7
Tel: 17505222756
Email: pules.cn@gmail.com
Mobile: +86-17551318830
Wechat: 17505222756
View History