35935-34-3
1-ETHYL-3-METHYLIMIDAZOLIUM IODIDE
CAS: 35935-34-3
Molecular Formula: C6H11IN2
35935-34-3 - Names and Identifiers
35935-34-3 - Physico-chemical Properties
| Molecular Formula | C6H11IN2 |
| Molar Mass | 238.07 |
| Melting Point | 79 °C |
| Water Solubility | Soluble in water, , dichloromethane, ethanol, acetonitrile. |
| Appearance | Powder |
| Color | White to pale yellow |
| BRN | 5160333 |
| Storage Condition | Keep in dark place,Inert atmosphere,Room temperature |
| Sensitive | Moisture Sensitive |
| MDL | MFCD03701101 |
35935-34-3 - Risk and Safety
| Hazard Symbols | Xi - Irritant |
| Risk Codes | R36/37/38 - Irritating to eyes, respiratory system and skin. R41 - Risk of serious damage to eyes R37/38 - Irritating to respiratory system and skin. |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36 - Wear suitable protective clothing. S39 - Wear eye / face protection. |
| WGK Germany | 3 |
| HS Code | 29332900 |
35935-34-3 - Introduction
1-ETHYL-3-METHYLIMIDAZOLIUM IODIDE is an ionic liquid with the chemical formula C6H11N2I. The following is a description of its nature, use, preparation and safety information:
Nature:
-Appearance: Colorless to light yellow solid
-Solubility: Soluble in water and organic solvents
-Melting Point: about 90-100 ℃
-Density: approx. 1.7g/cm3
Use:
1-ethyl-3-methyllimidazolium IODIDE has many uses in organic synthesis, such:
-As an ionic liquid solvent for catalytic reactions, replacing organic solvents
-as an electrolyte and catalyst for ferrous oxide
-as reaction intermediates and reagents in organic synthesis
Method:
In General, 1-ethyl-3-methyllimidazolium IODIDE can be prepared by the following steps:
1. The first preparation of 3-methylimidazole (3-Methylimidazole), the common method is the reaction of 1-methylimidazole with methyl alkylation reagent.
2. 3-methylimidazole was reacted with iodopropane to obtain 1-Ethyl-3-methylimidazole (1-ethy1-3-methylimidazole).
3. Finally, 1-ETHYL-3-METHYLIMIDAZOLIUM IODIDE was prepared by reacting 1-ETHYL-3-METHYLIMIDAZOLIUM IODIDE with hydrogen IODIDE.
Safety Information:
1-ETHYL-3-METHYLIMIDAZOLIUM IODIDE is safe, but the following safety precautions still need to be observed:
-Avoid touching the skin and eyes directly when touching, and ensure that the operation is carried out in a well-ventilated place.
-Avoid inhaling its powder or dust.
-Read and understand the relevant safety data sheets carefully before use, and operate in accordance with the recommendations in the Operation Manual.
-Keep dry and sealed during storage to avoid reaction with other chemicals.
-Waste disposal shall comply with local regulations and shall not be dumped at will.
Nature:
-Appearance: Colorless to light yellow solid
-Solubility: Soluble in water and organic solvents
-Melting Point: about 90-100 ℃
-Density: approx. 1.7g/cm3
Use:
1-ethyl-3-methyllimidazolium IODIDE has many uses in organic synthesis, such:
-As an ionic liquid solvent for catalytic reactions, replacing organic solvents
-as an electrolyte and catalyst for ferrous oxide
-as reaction intermediates and reagents in organic synthesis
Method:
In General, 1-ethyl-3-methyllimidazolium IODIDE can be prepared by the following steps:
1. The first preparation of 3-methylimidazole (3-Methylimidazole), the common method is the reaction of 1-methylimidazole with methyl alkylation reagent.
2. 3-methylimidazole was reacted with iodopropane to obtain 1-Ethyl-3-methylimidazole (1-ethy1-3-methylimidazole).
3. Finally, 1-ETHYL-3-METHYLIMIDAZOLIUM IODIDE was prepared by reacting 1-ETHYL-3-METHYLIMIDAZOLIUM IODIDE with hydrogen IODIDE.
Safety Information:
1-ETHYL-3-METHYLIMIDAZOLIUM IODIDE is safe, but the following safety precautions still need to be observed:
-Avoid touching the skin and eyes directly when touching, and ensure that the operation is carried out in a well-ventilated place.
-Avoid inhaling its powder or dust.
-Read and understand the relevant safety data sheets carefully before use, and operate in accordance with the recommendations in the Operation Manual.
-Keep dry and sealed during storage to avoid reaction with other chemicals.
-Waste disposal shall comply with local regulations and shall not be dumped at will.
Last Update：2024-04-10 22:29:15
Supplier List
Spot supply
Product Name: 1-Ethyl-3-methylimidazolium iodide Visit Supplier Webpage Request for quotationCAS: 35935-34-3
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
Spot supply
Product Name: 1-Ethyl-3-methylimidazolium iodide Visit Supplier Webpage Request for quotationCAS: 35935-34-3
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
View History