4-(2-FLUOROBENZOYL)-1-METHYL-1H-PYRROLE-2-CARBALDEHYDE
4-(2-Fluorobenzoyl)-1-methyl-1H-pyrrole-2-carbaldehyde
CAS: 446275-97-4
Molecular Formula: C13H10FNO2
4-(2-FLUOROBENZOYL)-1-METHYL-1H-PYRROLE-2-CARBALDEHYDE - Names and Identifiers
4-(2-FLUOROBENZOYL)-1-METHYL-1H-PYRROLE-2-CARBALDEHYDE - Physico-chemical Properties
| Molecular Formula | C13H10FNO2 |
| Molar Mass | 231.22 |
| Density | 1.20±0.1 g/cm3(Predicted) |
| Melting Point | 122-123°C |
| Boling Point | 413.2±40.0 °C(Predicted) |
| pKa | -10.70±0.70(Predicted) |
| Storage Condition | Room Temprature |
| Sensitive | IRRITANT |
| MDL | MFCD03425711 |
4-(2-FLUOROBENZOYL)-1-METHYL-1H-PYRROLE-2-CARBALDEHYDE - Risk and Safety
| Hazard Symbols | Xi - Irritant |
| Hazard Class | IRRITANT |
4-(2-FLUOROBENZOYL)-1-METHYL-1H-PYRROLE-2-CARBALDEHYDE - Introduction
4-(2-Fluoroyl)-(4-(2-fluoro-benzoyl)-1-methyl-1H-pyrrole-2-carbaldehyde) is an organic compound. The following is information about the properties, use, preparation and safety of this compound:
Nature:
-Appearance: Light yellow solid
-Molecular formula: C13H10FN2O2
-Molecular weight: 246.23g/mol
-Melting point: about 141-145°C
-Boiling point: about 380-390°C (predicted)
-Solubility: Soluble in some organic solvents such as chloroform and dimethyl sulfoxide
Use:
- 4-(2-Fluorobenzoyl)-can be used as an intermediate in organic synthesis and used in the synthesis of other organic compounds.
-In drug development, the compound may have potential activity and can be used as a building block of drug molecules.
Preparation Method:
- 4-(2-Fluorobenzoyl)-can be obtained by chemical synthesis, and the specific synthetic route may depend on the needs of each laboratory.
Safety Information:
-There may be limited information on the toxicity and safety of this compound. Use should follow laboratory safety procedures and chemical use guidelines.
-Due to its potential cytotoxicity, appropriate protective measures should be taken, such as wearing protective glasses, gloves and laboratory coats, and maintaining good ventilation during operation.
-Avoid direct skin contact and avoid inhaling gas or dust.
-During handling and storage, the compound should be properly labeled and stored, and its waste should be properly disposed.
-When using this compound, it is recommended to consult the relevant safety data sheet and operating instructions for more safe operation information.
Nature:
-Appearance: Light yellow solid
-Molecular formula: C13H10FN2O2
-Molecular weight: 246.23g/mol
-Melting point: about 141-145°C
-Boiling point: about 380-390°C (predicted)
-Solubility: Soluble in some organic solvents such as chloroform and dimethyl sulfoxide
Use:
- 4-(2-Fluorobenzoyl)-can be used as an intermediate in organic synthesis and used in the synthesis of other organic compounds.
-In drug development, the compound may have potential activity and can be used as a building block of drug molecules.
Preparation Method:
- 4-(2-Fluorobenzoyl)-can be obtained by chemical synthesis, and the specific synthetic route may depend on the needs of each laboratory.
Safety Information:
-There may be limited information on the toxicity and safety of this compound. Use should follow laboratory safety procedures and chemical use guidelines.
-Due to its potential cytotoxicity, appropriate protective measures should be taken, such as wearing protective glasses, gloves and laboratory coats, and maintaining good ventilation during operation.
-Avoid direct skin contact and avoid inhaling gas or dust.
-During handling and storage, the compound should be properly labeled and stored, and its waste should be properly disposed.
-When using this compound, it is recommended to consult the relevant safety data sheet and operating instructions for more safe operation information.
Last Update：2024-04-09 21:04:16
