4-Bromo-2,6-dimethyliodobenzene
5-bromo-2-iodo-1,3-dimethylbenzene
CAS: 206559-43-5;260355-37-1
Molecular Formula: C8H8BrI
4-Bromo-2,6-dimethyliodobenzene - Names and Identifiers
4-Bromo-2,6-dimethyliodobenzene - Physico-chemical Properties
| Molecular Formula | C8H8BrI |
| Molar Mass | 310.96 |
| Density | 1.940 |
| Melting Point | 42 °C |
| Boling Point | 282℃ |
| Flash Point | 125℃ |
| Vapor Presure | 0.00573mmHg at 25°C |
| Storage Condition | Keep in dark place,Sealed in dry,2-8°C |
| Refractive Index | 1.622 |
4-Bromo-2,6-dimethyliodobenzene - Risk and Safety
| Hazard Symbols | Xi - Irritant |
| Risk Codes | 36/37/38 - Irritating to eyes, respiratory system and skin. |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. |
| Hazard Class | IRRITANT |
4-Bromo-2,6-dimethyliodobenzene - Introduction
5-bromo-2-iodo-1,3-dimethylbenzene is an organic compound with the molecular formula C8H8BrI. The structure has two methyl groups located on carbon atoms 2 and 6 on the benzene ring, A bromine atom and an iodine atom are each attached to the benzene ring at position 4.
Regarding the properties of 5-bromo-2-iodo-1,3-dimethylbenzene, it is a colorless or light yellow crystalline solid, soluble in organic solvents such as ether and acetone. It is stable at room temperature, but it will decompose under the influence of light and high temperature. It has a melting point of 76-78 ° C. And a boiling point to be determined.
5-bromo-2-iodo-1,3-dimethylbenzene has a wide range of applications in chemical research. It is often used as a reagent in organic synthesis, such as a catalyst for catalytic reactions, a reagent for halogenation reactions, and a reagent for the synthesis of aromatic compounds. In addition, it can also be used in the field of dyes, fluorescent agents and medicine.
The preparation method of 5-bromo-2-iodo-1,3-dimethylbenzene can be obtained by reacting 2,6-dimethyl-4-aminobenzene with cuprous bromide and sodium iodide. The specific reaction conditions can be optimized according to the experimental needs.
Regarding the safety information of 5-bromo-2-iodo-1,3-dimethylbenzene, it is an organic compound with certain toxicity. Avoid direct contact with skin, eyes and respiratory tract. Good ventilation and appropriate personal protective equipment such as gloves, goggles and protective masks should be worn during operation. Pay attention to fire and explosion prevention during use and storage, and keep away from fire and heat sources. If there is an accidental leak, clean it up with an appropriate adsorbent.
Regarding the properties of 5-bromo-2-iodo-1,3-dimethylbenzene, it is a colorless or light yellow crystalline solid, soluble in organic solvents such as ether and acetone. It is stable at room temperature, but it will decompose under the influence of light and high temperature. It has a melting point of 76-78 ° C. And a boiling point to be determined.
5-bromo-2-iodo-1,3-dimethylbenzene has a wide range of applications in chemical research. It is often used as a reagent in organic synthesis, such as a catalyst for catalytic reactions, a reagent for halogenation reactions, and a reagent for the synthesis of aromatic compounds. In addition, it can also be used in the field of dyes, fluorescent agents and medicine.
The preparation method of 5-bromo-2-iodo-1,3-dimethylbenzene can be obtained by reacting 2,6-dimethyl-4-aminobenzene with cuprous bromide and sodium iodide. The specific reaction conditions can be optimized according to the experimental needs.
Regarding the safety information of 5-bromo-2-iodo-1,3-dimethylbenzene, it is an organic compound with certain toxicity. Avoid direct contact with skin, eyes and respiratory tract. Good ventilation and appropriate personal protective equipment such as gloves, goggles and protective masks should be worn during operation. Pay attention to fire and explosion prevention during use and storage, and keep away from fire and heat sources. If there is an accidental leak, clean it up with an appropriate adsorbent.
Last Update：2024-04-09 21:54:55
Supplier List
Multiple Specifications
Product Name: 5-Bromo-2-Iodo-M-Xylene Visit Supplier Webpage Request for quotationCAS: 206559-43-5
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
Multiple Specifications
Product Name: 5-Bromo-2-Iodo-M-Xylene Visit Supplier Webpage Request for quotationCAS: 206559-43-5
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
View History