4-CHLORO-3-FLUOROPHENYLBORONIC ACID - Names and Identifiers
4-CHLORO-3-FLUOROPHENYLBORONIC ACID - Physico-chemical Properties
Molecular Formula | C6H5BClFO2
|
Molar Mass | 174.37 |
Density | 1.41±0.1 g/cm3(Predicted) |
Melting Point | 198-204℃ |
Boling Point | 302.6±52.0 °C(Predicted) |
Flash Point | 136.8°C |
Vapor Presure | 0.000434mmHg at 25°C |
Appearance | Solid |
pKa | 7.31±0.10(Predicted) |
Storage Condition | Keep in dark place,Sealed in dry,Room Temperature |
Refractive Index | 1.533 |
MDL | MFCD01319010 |
4-CHLORO-3-FLUOROPHENYLBORONIC ACID - Risk and Safety
Hazard Symbols | Xi - Irritant
|
Risk Codes | R36/37/38 - Irritating to eyes, respiratory system and skin.
R41 - Risk of serious damage to eyes
R37/38 - Irritating to respiratory system and skin.
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
S36 - Wear suitable protective clothing.
S39 - Wear eye / face protection.
S60 - This material and its container must be disposed of as hazardous waste.
S37 - Wear suitable gloves.
|
HS Code | 29319000 |
Hazard Class | IRRITANT |
4-CHLORO-3-FLUOROPHENYLBORONIC ACID - Introduction
4-Chloro-3-fluorophenylboronic acid is an organic boron compound with the chemical formula C6H4BClF2COOH. The following is a description of its nature, use, preparation and safety information:
Nature:
4-Chloro-3-fluorophenylboronic acid is a colorless or pale yellow crystal with low solubility. It is an acidic compound, soluble in organic solvents such as ethanol and dimethyl ketone, but insoluble in water.
Use:
4-Chloro-3-fluorophenylboronic acid is often used as a catalyst in organic synthesis reactions, especially in Suzuki coupling reactions. It can catalyze the coupling reaction between boronic acids of aromatic compounds and organic halides to form new carbon-carbon bonds. This reaction is widely used in the fields of drug synthesis, material chemistry and pesticide synthesis.
Preparation Method:
4-Chloro-3-fluorophenylboronic acid can be obtained by reacting phenylboronic acid with chlorofluoroalkane. The specific synthesis method can be adjusted according to the laboratory conditions and the desired yield.
Safety Information:
When using 4-chloro-3-fluorophenylboronic acid, it is necessary to pay attention to safe operation. Because it is an irritant substance, it may cause irritation to the eyes, skin and respiratory tract. Wear appropriate protective gloves, glasses and a protective mask during use. During storage and handling, contact with oxidizing agents and strong acids should be avoided to prevent accidents. When accidentally touching the skin or eyes, rinse immediately with plenty of water and seek medical help. During handling and storage, please refer to the relevant safety data sheets and operating manuals to ensure safety.
Last Update:2024-04-09 19:05:46