4-Chluoro-3-bromotoluene
3-BROMO-4-CHLOROTOLUENE
CAS: 57310-39-1
Molecular Formula: C7H6BrCl
4-Chluoro-3-bromotoluene - Names and Identifiers
| Name | 3-BROMO-4-CHLOROTOLUENE |
| Synonyms | 3-BROMO-4-CHLOROTOLUENE 4-Chluoro-3-bromotoluene 3 3-Bromo-4-Chloro Toluene 2-Bromo-1-chloro-4-methylbenzene Benzene, 2-bromo-1-chloro-4-methyl- |
| CAS | 57310-39-1 |
| InChI | InChI=1/C7H6BrCl/c1-5-2-3-7(9)6(8)4-5/h2-4H,1H3 |
4-Chluoro-3-bromotoluene - Physico-chemical Properties
| Molecular Formula | C7H6BrCl |
| Molar Mass | 205.48 |
| Density | 1,55 g/cm3 |
| Boling Point | 112 °C |
| Flash Point | 104.5°C |
| Vapor Presure | 0.107mmHg at 25°C |
| Specific Gravity | 1.55 |
| Storage Condition | Sealed in dry,Room Temperature |
| Refractive Index | 1.566 |
4-Chluoro-3-bromotoluene - Risk and Safety
| Risk Codes | R22 - Harmful if swallowed R51/53 - Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. |
| Safety Description | 61 - Avoid release to the environment. Refer to special instructions / safety data sheets. |
| UN IDs | UN 2811 6.1 / PGIII |
| WGK Germany | 3 |
| Hazard Class | IRRITANT |
4-Chluoro-3-bromotoluene - Introduction
3-BROMO-4-CHLOROTOLUENE is an organic compound with the chemical formula C7H6BrCl. The following is an introduction to some of its properties, uses, formulation and safety information:
Nature:
-Appearance: 3-BROMO-4-CHLOROTOLUENE is a colorless to pale yellow liquid or crystal.
-Melting point: approximately between -20°C and -23°C.
-Boiling point: approximately between 220°C and 230°C.
-Density: about 1.49 to 1.50g/cm³.
-Solubility: It is soluble in organic solvents, such as ethers and alcohols.
Use:
-Chemical raw materials: 3-BROMO-4-CHLOROTOLUENE can be used as an intermediate for the synthesis of other organic compounds.
-Pesticide: It can also be used as an intermediate for pesticides.
Preparation Method:
3-BROMO-4-CHLOROTOLUENE is generally prepared by reacting 4-chlorotoluene with a brominating agent. Specific steps include reacting 4-chlorotoluene with bromine under appropriate reaction conditions, and performing appropriate isolation and purification steps.
Safety Information:
-Harmful to the skin: 3-BROMO-4-CHLOROTOLUENE may have irritating and corrosive effects on the skin. Wear appropriate protective gloves and clothing when touching.
-Respiratory system: It may release harmful gases at high temperatures, and avoid contact with its vapor when breathing.
-Environmental risk: This compound may be toxic to aquatic organisms and must be handled and stored carefully to avoid harm to the environment.
Nature:
-Appearance: 3-BROMO-4-CHLOROTOLUENE is a colorless to pale yellow liquid or crystal.
-Melting point: approximately between -20°C and -23°C.
-Boiling point: approximately between 220°C and 230°C.
-Density: about 1.49 to 1.50g/cm³.
-Solubility: It is soluble in organic solvents, such as ethers and alcohols.
Use:
-Chemical raw materials: 3-BROMO-4-CHLOROTOLUENE can be used as an intermediate for the synthesis of other organic compounds.
-Pesticide: It can also be used as an intermediate for pesticides.
Preparation Method:
3-BROMO-4-CHLOROTOLUENE is generally prepared by reacting 4-chlorotoluene with a brominating agent. Specific steps include reacting 4-chlorotoluene with bromine under appropriate reaction conditions, and performing appropriate isolation and purification steps.
Safety Information:
-Harmful to the skin: 3-BROMO-4-CHLOROTOLUENE may have irritating and corrosive effects on the skin. Wear appropriate protective gloves and clothing when touching.
-Respiratory system: It may release harmful gases at high temperatures, and avoid contact with its vapor when breathing.
-Environmental risk: This compound may be toxic to aquatic organisms and must be handled and stored carefully to avoid harm to the environment.
Last Update：2024-04-10 22:29:15
