4-Methoxy-m-xylene - Names and Identifiers
4-Methoxy-m-xylene - Physico-chemical Properties
Molecular Formula | C9H12O
|
Molar Mass | 136.19 |
Density | 0.973g/mLat 25°C(lit.) |
Boling Point | 191°C(lit.) |
Flash Point | 146°F |
JECFA Number | 1245 |
Appearance | Liquid |
Specific Gravity | 0.973 |
Color | Clear colorless |
Storage Condition | Sealed in dry,Room Temperature |
Refractive Index | n20/D 1.514(lit.) |
4-Methoxy-m-xylene - Risk and Safety
Hazard Symbols | Xn - Harmful
|
Risk Codes | R36/37/38 - Irritating to eyes, respiratory system and skin.
R41 - Risk of serious damage to eyes
R37/38 - Irritating to respiratory system and skin.
R22 - Harmful if swallowed
|
Safety Description | S24/25 - Avoid contact with skin and eyes.
S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
|
UN IDs | 3271 |
WGK Germany | 3 |
HS Code | 29093090 |
4-Methoxy-m-xylene - Introduction
2,4-Dimethylanisole is an organic compound with the chemical formula C9H12O. The following is a description of its nature, use, preparation and safety information:
Nature:
-Appearance: 2,4-Dimethylanisole is a colorless to pale yellow liquid.
-Odor: Has a similar aromatic odor.
-Density: about 0.984g/cm³.
-Boiling point: about 206~207°C.
-Melting point: approximately -65°C.
-Solubility: Good solubility in common organic solvents.
Use:
- 2,4-Dimethylanisole can be used as raw materials and intermediates in organic synthesis.
-Because of its aromatic smell, it can be used as a fragrance in cosmetics and perfumes.
-can also be used as an initiator, fungicide and preservative.
Preparation Method:
- 2,4-Dimethylanisole can be obtained by reacting m-methylphenyllithium with methyl ether.
-In addition, it can be obtained by reacting 2,4-dimethyl phenyl ethylene with methyl chloride and dehydrogenation under alkaline conditions.
Safety Information:
- 2,4-Dimethylanisole is irritating to the skin and eyes, and should be avoided when using it.
-Long-term or heavy exposure may cause harm to health, and appropriate protective measures should be paid attention.
-should be stored in a cool, dry place, avoid contact with oxidants or strong acid.
-in the use and storage process should pay attention to fire and ventilation.
Last Update:2024-04-09 02:00:47