4-Methyl-3-(trifluoromethyl)benzonitrile

4-Methyl-3-(trifluoromethyl)benzonitrile - Names and Identifiers

Name	4-Methyl-3-(trifluoromethyl)benzonitrile
Synonyms	NCR D1 CXFFF 3-TRIFLUOROMETHYL-P-TOLUNITRILE 5-Cyano-2-methylbenzotrifluoride 3-Trifluoromethyl-4-methylbenzonitrile 3-Trifluoromethyl-4-methyl benzonitrile 4-METHYL-3-(TRIFLUOROMETHYL)BENZONITRILE 4-Methyl-3-(trifluoromethyl)benzonitrile Benzonitrile, 4-methyl-3-(trifluoromethyl)- benzonitrile, 4-methyl-3-(trifluoromethyl)- 4-Methyl-3-(trifluoromethyl)benzonitrile3-Trifluoromethyl-4-methylbenzonitrile
CAS	261952-06-1
InChI	InChI=1/C9H6F3N/c1-6-2-3-7(5-13)4-8(6)9(10,11)12/h2-4H,1H3

4-Methyl-3-(trifluoromethyl)benzonitrile - Physico-chemical Properties

Molecular Formula	C9H6F3N
Molar Mass	185.15
Density	1 g/cm3
Melting Point	60-62°C
Boling Point	220.0±35.0 °C(Predicted)
Flash Point	86.829°C
Vapor Presure	0.116mmHg at 25°C
Storage Condition	Sealed in dry,Room Temperature
Refractive Index	1.464
MDL	MFCD01631597

4-Methyl-3-(trifluoromethyl)benzonitrile - Risk and Safety

Hazard Symbols	T - Toxic
Risk Codes	R20/21/22 - Harmful by inhalation, in contact with skin and if swallowed. R36/37/38 - Irritating to eyes, respiratory system and skin.
Safety Description	S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
UN IDs	3276
Hazard Note	Toxic
Hazard Class	6.1
Packing Group	III

4-Methyl-3-(trifluoromethyl)benzonitrile - Introduction

4-Methyl-3-(trifluoromethyl)benzonitrile is an organic compound. Its chemical formula is C9H6F3N and its molecular weight is 183.15g/mol.

The following is a detailed description of the properties and uses of the compound:

Nature:
-Appearance: Colorless to slightly yellow crystal
-Solubility: Soluble in some organic solvents, such as ether and chloroform
-Melting point: 65-69 ° C
-Boiling Point: 218-220 ° C
-Density: 1.34g/cm³

Use:
4-Methyl-3-(trifluoromethyl)benzonitril is often used as an intermediate in organic synthesis. It can be used to synthesize drugs, pesticides and other organic compounds. The trifluoromethyl group of the compound can increase the chemical activity and solubility of the compound, thereby enhancing its reaction performance during the synthesis process.

Method:
4-Methyl-3-(trifluoromethyl)benzonitrile is usually converted to 3-amino -4-Methyl -1-(trifluoromethyl) benzene is prepared by converting it to its corresponding aromatic nitrile. The conversion reaction can be carried out at an appropriate temperature using a catalyst such as cuprous cyanide or cupric cyanide.

Safety Information:
Due to lack of adequate research and testing, detailed safety information for this compound is currently limited. However, as an organic compound, it should be handled in accordance with the usual laboratory safety procedures, such as wearing appropriate personal protective equipment, avoiding contact with skin and eyes, avoiding inhalation of gas or dust, work in a well-ventilated area. If taken or inhaled, consult a doctor immediately and bring the compound's label or safety data sheet. The most reliable security information is usually available from the vendor.

Last Update：2024-04-09 21:04:16