4-PHENYLBUTYLAMINE - Names and Identifiers
4-PHENYLBUTYLAMINE - Physico-chemical Properties
Molecular Formula | C10H15N
|
Molar Mass | 149.23 |
Density | 0.944g/mLat 25°C(lit.) |
Melting Point | 143°C (estimate) |
Boling Point | 123-124°C17mm Hg(lit.) |
Flash Point | 215°F |
Solubility | Chloroform, Methanol (Slightly) |
Vapor Presure | 0.0373mmHg at 25°C |
Appearance | Oil |
Color | Colourless |
BRN | 2080045 |
pKa | 10.66±0.10(Predicted) |
Storage Condition | Keep in dark place,Inert atmosphere,Room temperature |
Sensitive | Air Sensitive |
Refractive Index | n20/D 1.519(lit.) |
MDL | MFCD00008231 |
4-PHENYLBUTYLAMINE - Risk and Safety
Hazard Symbols | Xi - Irritant
|
Risk Codes | 36/37/38 - Irritating to eyes, respiratory system and skin.
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36 - Wear suitable protective clothing.
|
UN IDs | 2735 |
WGK Germany | 3 |
Hazard Note | Irritant |
Hazard Class | 8 |
Packing Group | III |
4-PHENYLBUTYLAMINE - Introduction
4-Phenylbutylamine is an organic compound with the chemical formula C10H15N. The following is a description of its nature, use, formulation and safety information:
Nature:
-Appearance: A colorless to light yellow liquid
-Density: Approximately 1.04 g/mL
-Melting point: approximately -58°C
-Boiling point: about 184°C
-Soluble in water and organic solvents
Use:
-4-Phenylbutylamine is commonly used as an intermediate in organic synthesis. It can participate in a variety of organic synthesis reactions, such as carboxylic acid anhydride amide reaction and reduced amine reaction.
-It is also used in the preparation of dyes, pharmaceuticals and fine chemical products.
Preparation Method:
-4-Phenylbutylamine can be prepared by reacting aniline with acetone. The specific preparation method is that aniline and acetone are subjected to an amidation reaction in the presence of sodium hydroxide, and then acidified with an acid to obtain 4-phenylbutylamine.
Safety Information:
-4-Phenylbutylamine is an irritant substance that may cause irritation when in contact with skin and eyes. Appropriate protective measures should be taken during operation, such as wearing gloves, goggles, etc.
-Pay attention to avoid contact with oxidants during storage and use to avoid fire or explosion.
-In case of accidental inhalation or ingestion, immediate first aid should be administered and medical advice should be sought.
Please note that the above information is only a general introduction, and the use and operation of the specific circumstances also need to refer to the relevant safety information and guidelines. When conducting experiments or industrial use, it is important to strictly follow the relevant safety procedures.
Last Update:2024-04-09 15:17:51