5-NORBORNEN-2-YL(ETHYL)CHLORODIMETHYLSILANE

5-NORBORNEN-2-YL(ETHYL)CHLORODIMETHYLSILANE - Names and Identifiers

Name	5-Norbornen-2-Yl(Ethyl)Chlorodimethylsilane
Synonyms	Norbornenyl Ethyl Dimethyl Chlorosilane NORBORNENYL ETHYL DIMETHYL CHLOROSILANE 5-Norbornen-2-Yl(Ethyl)Chlorodimethylsilane 5-NORBORNEN-2-YL(ETHYL)CHLORODIMETHYLSILANE [(Bicycloheptenyl)Ethyl]Dimethylchlorosilane [(BICYCLOHEPTENYL)ETHYL]DIMETHYLCHLOROSILANE [(5-BICYCLO[2.2.1]HEPT-2-ENYL)ETHYL]DIMETHYLCHLOROSILANE (2-Bicyclo[2.2.1]Hept-5-En-2-Ylethyl)(Chloro)Dimethylsilane 5-NORBORNEN-2-YL(ETHYL)CHLORODIMETHYLSILAN E, MIXTURE OF ENDO AN 5-Norbornen-2-Yl(Ethyl)Chlorodimethylsilan E, Mixture Of Endo An 5-Norbornen-2-Yl(Ethyl)Chlorodimethylsilan E, Mixture Of Endo And Exo,
CAS	120543-78-4
InChI	InChI=1/C11H19ClSi/c1-13(2,12)6-5-11-8-9-3-4-10(11)7-9/h3-4,9-11H,5-8H2,1-2H3

5-NORBORNEN-2-YL(ETHYL)CHLORODIMETHYLSILANE - Physico-chemical Properties

Molecular Formula	C11H19ClSi
Molar Mass	214.81
Density	0.991g/mLat 25°C(lit.)
Boling Point	231-232°C(lit.)
Flash Point	220°F
Vapor Presure	0.0352mmHg at 25°C
Specific Gravity	0.991
Storage Condition	Room Temprature
Sensitive	8: reacts rapidly with moisture, water, protic solvents
Refractive Index	n20/D 1.48(lit.)
Physical and Chemical Properties	WGK Germany:3

5-NORBORNEN-2-YL(ETHYL)CHLORODIMETHYLSILANE - Risk and Safety

Hazard Symbols	C - Corrosive
Risk Codes	34 - Causes burns
Safety Description	S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
UN IDs	UN 2987 8/PG 2
WGK Germany	3
TSCA	No

5-NORBORNEN-2-YL(ETHYL)CHLORODIMETHYLSILANE - Introduction

[(5-Bicyclo [2.2.1] hept-2-ene) ethyl] dimethylchlorosilane is an organosilicon compound with the chemical formula C12H19ClSi. Its structure contains a cyclic heptane and a vinyl group, connected to the silicon atom through two methyl groups.

Nature:
-Appearance: colorless liquid
-Molecular weight: 228.83g/mol
-Boiling point: 138-140 ℃
-Density: 0.98g/cm³
-Melting point:-43 ℃

Use:
-Used as catalyst and intermediate in organic synthesis.
-It can be used to modify polymer materials, such as improving their anti-adhesion and wear resistance.
-Used as an additive in coatings, adhesives and sealants to improve their adhesion and weather resistance.
-Used to prepare silicone polymers and silicon-based polymers.

Preparation Method:
The preparation method of [(5-bicyclo [2.2.1] heptyl-2-ene) ethyl] dimethylchlorosilane can be carried out by the following steps:
1. Dissolve 5-bicyclo [2.2.1] hept-2-ene in vinyl chloride.
2. add dimethyl chlorosilane to the solution for reaction.
3. The reaction conditions (temperature and time) are controlled to allow the reaction to proceed.
4. Isolation and purification of the product.

Safety Information:
[(5-bicyclo [2.2.1] hept-2-ene) ethyl] dimethylchlorosilane is an organosilicon compound. The following safety measures should be paid attention to during operation:
-Avoid contact with skin and eyes. In case of contact, rinse immediately with plenty of water and seek medical treatment.
-in the use of the process should maintain good ventilation conditions, to avoid inhalation of steam or spray. If there is no good ventilation, wear appropriate respiratory protective equipment.
-For the risk of toxic gas generation, appropriate protective equipment should be used.
-Storage should be placed in a cool, dry and well-ventilated place, away from fire and oxidizing agents.
-Dispose of waste material in accordance with local laws and regulations.

Please note that this is only a brief introduction, specific use and safety information also need to refer to the relevant technical literature and safety data sheets.

Last Update：2024-04-10 22:29:15