54127-63-8
5-Chloro-6-hydroxynicotinic Acid
CAS: 54127-63-8
Molecular Formula: C6H4ClNO3
54127-63-8 - Names and Identifiers
54127-63-8 - Physico-chemical Properties
| Molecular Formula | C6H4ClNO3 |
| Molar Mass | 173.55 |
| Density | 1.4914 (rough estimate) |
| Melting Point | ≥300°C(lit.) |
| Boling Point | 334.6±42.0 °C(Predicted) |
| Flash Point | 156.1°C |
| Vapor Presure | 2.42E-05mmHg at 25°C |
| Appearance | White to light brown fine crystalline powder |
| Color | White to Light yellow to Light orange |
| pKa | 3.38±0.50(Predicted) |
| Storage Condition | Sealed in dry,Room Temperature |
| Refractive Index | 1.5810 (estimate) |
| MDL | MFCD00052950 |
54127-63-8 - Risk and Safety
| Risk Codes | R36/37/38 - Irritating to eyes, respiratory system and skin. R20/21/22 - Harmful by inhalation, in contact with skin and if swallowed. |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S37/39 - Wear suitable gloves and eye/face protection S36 - Wear suitable protective clothing. |
| WGK Germany | 3 |
| Hazard Note | Irritant |
54127-63-8 - Introduction
Acid is an organic compound with the chemical formula C6H4ClNO3. The following is an introduction to its nature, use, formulation and safety information:
Nature:
-Appearance: White to pale yellow amorphous solid.
-Melting point: about 140-150 degrees Celsius.
-Solubility: Soluble in common organic solvents such as water, alcohol and chloroform.
Use:
-or Acid can be used as an intermediate in organic synthesis for the synthesis of other compounds.
-It can also be used as a ligand for the synthesis of nickel complexes.
Preparation Method:
-or Acid can usually be prepared by chlorination of 6-hydroxynicotinic acid.
Safety Information:
-The toxicity of Acid has not been fully studied, so care should be taken to avoid inhalation of dust or contact with skin during operation.
-When handling and using, you should follow laboratory safety procedures and wear appropriate personal protective equipment, such as laboratory coats, gloves and eye protection.
-Ventilation equipment should be used when handling any chemical substances and ensure that the laboratory has the correct fire safety equipment.
For any detailed safety information on chemical substances, it is recommended to consult the safety data sheet of the chemical manufacturer and follow local regulations and safety practices.
Nature:
-Appearance: White to pale yellow amorphous solid.
-Melting point: about 140-150 degrees Celsius.
-Solubility: Soluble in common organic solvents such as water, alcohol and chloroform.
Use:
-or Acid can be used as an intermediate in organic synthesis for the synthesis of other compounds.
-It can also be used as a ligand for the synthesis of nickel complexes.
Preparation Method:
-or Acid can usually be prepared by chlorination of 6-hydroxynicotinic acid.
Safety Information:
-The toxicity of Acid has not been fully studied, so care should be taken to avoid inhalation of dust or contact with skin during operation.
-When handling and using, you should follow laboratory safety procedures and wear appropriate personal protective equipment, such as laboratory coats, gloves and eye protection.
-Ventilation equipment should be used when handling any chemical substances and ensure that the laboratory has the correct fire safety equipment.
For any detailed safety information on chemical substances, it is recommended to consult the safety data sheet of the chemical manufacturer and follow local regulations and safety practices.
Last Update：2024-04-10 22:29:15
Supplier List
Spot supply
Product Name: 5-Chloro-6-Hydroxy-3-Pyridinecarboxylic Acid Visit Supplier Webpage Request for quotationCAS: 54127-63-8
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
Spot supply
Product Name: 5-Chloro-6-Hydroxy-3-Pyridinecarboxylic Acid Visit Supplier Webpage Request for quotationCAS: 54127-63-8
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
View History