5433-01-2
1-Bromo-3-isopropylbenzene
CAS: 5433-01-2
Molecular Formula: C9H11Br
5433-01-2 - Names and Identifiers
5433-01-2 - Physico-chemical Properties
| Molecular Formula | C9H11Br |
| Molar Mass | 199.09 |
| Density | 1,285 g/cm3 |
| Melting Point | -10°C (estimate) |
| Boling Point | 52-53°C 0,8mm |
| Flash Point | 52-53°C/0.8mm |
| Water Solubility | Difficult to mix in water. |
| Vapor Presure | 0.277mmHg at 25°C |
| Appearance | clear liquid |
| Color | Colorless to Light orange to Yellow |
| BRN | 1858092 |
| Storage Condition | Inert atmosphere,Room Temperature |
| Refractive Index | 1.5302 |
| MDL | MFCD01318112 |
5433-01-2 - Risk and Safety
| Risk Codes | R22 - Harmful if swallowed R50/53 - Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R51/53 - Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R36/38 - Irritating to eyes and skin. |
| Safety Description | S24/25 - Avoid contact with skin and eyes. S61 - Avoid release to the environment. Refer to special instructions / safety data sheets. S60 - This material and its container must be disposed of as hazardous waste. S36 - Wear suitable protective clothing. S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. |
| UN IDs | 3082 |
| HS Code | 29039990 |
5433-01-2 - Introduction
1-Bromo-3-isopropylbenzene, also known as 1-Bromo-3-isopropylbenzene, has a chemical structural formula of C9H11Br. The following is a description of its nature, use, preparation and safety information:
Nature:
-Appearance: colorless liquid
-Melting point:-50 ℃
-boiling point: 192-193 ℃
-Density: 1.17g/cm³
-Molecular weight: 209.09g/mol
-Solubility: Insoluble in water, soluble in organic solvents
Use:
- 1-Bromo-3-isopropylbenzene is widely used in organic synthesis reactions and is an important organic bromine compound
-It can be used as a starting material for the preparation of other organic compounds, such as heterocyclic compounds or pharmaceutical intermediates
-Also used as raw material for surfactants, fragrances and preservatives
Preparation Method:
1-Bromo-3-isopropylbenzene can be prepared by the following methods:
-Dissolve 3-isopropylbenzene in a solvent (such as ethanol or ketone), then add sodium bromide and an acid (such as hydrochloric acid) to react at an appropriate temperature for a period of time, and extract and distill to obtain the target product.
Safety Information:
- 1-Bromo-3-isopropylbenzene is an organic halide and has certain toxicity. It should be handled in accordance with safe operating procedures
-Avoid direct contact with skin and eyes, wear protective gloves and goggles if necessary
-Operate in a well-ventilated place to avoid inhaling its vapors
-Avoid contact with oxidants, strong acids or alkalis during storage
-If a leak occurs, clean it up with an appropriate absorbent, and pay attention to avoid environmental pollution
Please note that the use and handling of chemicals should follow the appropriate safety procedures and follow the laboratory safety rules.
Nature:
-Appearance: colorless liquid
-Melting point:-50 ℃
-boiling point: 192-193 ℃
-Density: 1.17g/cm³
-Molecular weight: 209.09g/mol
-Solubility: Insoluble in water, soluble in organic solvents
Use:
- 1-Bromo-3-isopropylbenzene is widely used in organic synthesis reactions and is an important organic bromine compound
-It can be used as a starting material for the preparation of other organic compounds, such as heterocyclic compounds or pharmaceutical intermediates
-Also used as raw material for surfactants, fragrances and preservatives
Preparation Method:
1-Bromo-3-isopropylbenzene can be prepared by the following methods:
-Dissolve 3-isopropylbenzene in a solvent (such as ethanol or ketone), then add sodium bromide and an acid (such as hydrochloric acid) to react at an appropriate temperature for a period of time, and extract and distill to obtain the target product.
Safety Information:
- 1-Bromo-3-isopropylbenzene is an organic halide and has certain toxicity. It should be handled in accordance with safe operating procedures
-Avoid direct contact with skin and eyes, wear protective gloves and goggles if necessary
-Operate in a well-ventilated place to avoid inhaling its vapors
-Avoid contact with oxidants, strong acids or alkalis during storage
-If a leak occurs, clean it up with an appropriate absorbent, and pay attention to avoid environmental pollution
Please note that the use and handling of chemicals should follow the appropriate safety procedures and follow the laboratory safety rules.
Last Update：2024-04-09 15:17:58
Supplier List
Product Name: 1-Bromo-3-Isopropylbenzene Visit Supplier Webpage Request for quotation
CAS: 5433-01-2
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 5433-01-2
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
Product Name: 1-Bromo-3-Isopropylbenzene Visit Supplier Webpage Request for quotation
CAS: 5433-01-2
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 5433-01-2
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
View History