7353-91-5
bromo[4-(dimethylamino)phenyl]magnesium
CAS: 7353-91-5
Molecular Formula: C8H10BrMgN
7353-91-5 - Names and Identifiers
| Name | bromo[4-(dimethylamino)phenyl]magnesium |
| Synonyms | 4-N,N-Dimethylanilinemagnesium bromide 4-DIMETHYLAMINOPHENYLMAGNESIUM BROMIDE bromo[4-(dimethylamino)phenyl]magnesium 4-(N,N-DIMETHYL)ANILINEMAGNESIUM BROMIDE 4-(N,N-Dimethyl)Anilinemagnesium Bromide 4-(n,n-dimethyl)aniline magnesium bromide solution 4-(N,N-Dimethyl)aniline magnesium bromide 0.5M in THF 4-(N,N-Dimethyl)aniline magnesium bromide solution 0.5 in THF 4-Dimethylaminophenylmagnesium Bromide, 0.75 M In Tetrahydrofuran 4-(N,N-DIMETHYL)ANILINEMAGNESIUM BROMIDE, 0.5M SOLUTION IN TETRAHYDROFURAN |
| CAS | 7353-91-5 |
| InChI | InChI=1/C8H10N.BrH.Mg/c1-9(2)8-6-4-3-5-7-8;;/h4-7H,1-2H3;1H;/q;;+1/p-1/rC8H10BrMgN/c1-11(2)8-5-3-7(10-9)4-6-8/h3-6H,1-2H3 |
7353-91-5 - Physico-chemical Properties
| Molecular Formula | C8H10BrMgN |
| Molar Mass | 224.38 |
| Density | 0.951g/mLat 25°C |
| Melting Point | 53-54℃ |
| Boling Point | 65°C |
| Flash Point | <1°F |
| Storage Condition | 2-8°C |
7353-91-5 - Risk and Safety
| Risk Codes | R11 - Highly Flammable R14 - Reacts violently with water R19 - May form explosive peroxides R22 - Harmful if swallowed R34 - Causes burns R40 - Limited evidence of a carcinogenic effect R37 - Irritating to the respiratory system |
| Safety Description | S16 - Keep away from sources of ignition. S23 - Do not breathe vapour. S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) |
| UN IDs | UN 2924 3/PG 2 |
| WGK Germany | 1 |
7353-91-5 - Introduction
Bromo [4-(dimethylamino)phenyl]magnesium, also known as bromo[4-(dimethylamino)phenyl]magnesium, is an organic compound. The following is a description of its nature, use, formulation and safety information:
Nature:
-Appearance: generally colorless to yellowish solid.
-Solubility: Soluble in inert solvents such as ether, disulfide and tetrahydrofuran.
-Stability: Stable at room temperature, but sensitive to wet oxygen.
Use:
-As an important reagent in organic synthesis, it is often used in coupling reactions, such as Grignard reaction and Suzuki coupling.
-Can be used to synthesize organic compounds with different functional groups, such as aromatic amines and aromatic ethers.
Preparation Method:
-Usually obtained from the reaction of 4-(N,N-dimethyl) aniline and magnesium alloy.
-The reaction can be carried out under an inert atmosphere, usually using an inert solvent as the reaction medium.
Safety Information:
-The compound is oxygen sensitive and should be kept in a sealed container and away from wet oxygen.
-During use, care should be taken to avoid contact with skin and eyes, and avoid inhaling its dust or gas.
-The operation should be carried out in a well-ventilated laboratory and protective measures should be taken, such as wearing protective gloves and glasses.
-When exposed to water or moisture, toxic gases may be generated, so it needs to be stored and operated under dry conditions.
Nature:
-Appearance: generally colorless to yellowish solid.
-Solubility: Soluble in inert solvents such as ether, disulfide and tetrahydrofuran.
-Stability: Stable at room temperature, but sensitive to wet oxygen.
Use:
-As an important reagent in organic synthesis, it is often used in coupling reactions, such as Grignard reaction and Suzuki coupling.
-Can be used to synthesize organic compounds with different functional groups, such as aromatic amines and aromatic ethers.
Preparation Method:
-Usually obtained from the reaction of 4-(N,N-dimethyl) aniline and magnesium alloy.
-The reaction can be carried out under an inert atmosphere, usually using an inert solvent as the reaction medium.
Safety Information:
-The compound is oxygen sensitive and should be kept in a sealed container and away from wet oxygen.
-During use, care should be taken to avoid contact with skin and eyes, and avoid inhaling its dust or gas.
-The operation should be carried out in a well-ventilated laboratory and protective measures should be taken, such as wearing protective gloves and glasses.
-When exposed to water or moisture, toxic gases may be generated, so it needs to be stored and operated under dry conditions.
Last Update：2024-04-09 20:49:11
