85736-97-6 - Names and Identifiers
85736-97-6 - Introduction
2-Propenoic acid, 2-methyl-, C11-14-isoalkyl esters, C13-rich is an organic compound with the chemical formula C16H30O2. The following is a description of the nature, use, preparation and safety information of 2-Propenoic acid, 2-methyl-, C11-14-isoalkyl esters, C13-rich:
Nature:
1. Appearance: 2-Propenoic acid, 2-methyl-, C11-14-isoalkyl esters, the C13-rich is colorless to light yellow liquid.
2. Density: about 0.84g/cm3.
3. Boiling Point: about 340 ° C.
4. Melting Point: About -60 ° C.
5. Solubility: 2-Propenoic acid, 2-methyl-, C11-14-isoalkyl esters, C13-rich soluble in organic solvents, such as alcohol, ether, etc.
Use:
1. 2-Propenoic acid, 2-methyl-, C11-14-isoalkyl esters, C13-rich are commonly used as plasticizers to improve the flexibility, ductility and impact resistance of plastics.
2. In the paper industry, 2-Propenoic acid, 2-methyl-, C11-14-isoalkyl esters, are C13-rich used as dispersants for inks to help evenly distribute the color of the ink.
3. 2-Propenoic acid, 2-methyl-, C11-14-isoalkyl esters, C13-rich can also be used as a regulator to improve the rheological properties and viscosity of coatings.
Preparation Method:
2-Propenoic acid, 2-methyl-, C11-14-isoalkyl esters, C13-rich are generally prepared by hydrogenation of ethylene to obtain tridecanol, which is then reacted with methacrylic acid. The specific preparation method is to react tridecyl alcohol with methacrylic acid under the action of a catalyst, and heat it under appropriate temperature and pressure conditions to obtain 2-Propenoic acid, 2-methyl-, C11-14-isoalkyl esters, c13-rich.
Safety Information:
1. 2-propylene acid, 2-methyl-, C11-14-isoalkyl esters, C13-rich combustible, may cause combustion and explosion when encountering open flame or high temperature.
2. Use should wear protective gloves, goggles and other protective equipment, avoid contact with skin and eyes.
3. Avoid inhaling gas, vapor, mist or dust. If you feel uncomfortable, you should leave the site in time and rest in a well-ventilated place.
4. If the external contact to the skin or inhalation, please rinse immediately with plenty of water, and medical treatment.
Please note that the above information is for reference only. Please refer to the laboratory safety operation procedures and relevant regulations and standards for specific operations.
Last Update:2024-04-10 22:29:15