89059-34-7 - Names and Identifiers
89059-34-7 - Physico-chemical Properties
Molecular Formula | C6H6O
|
Molar Mass | 100.17 |
Density | 1.139 g/mL at 25 °C |
Melting Point | 40-42 °C (lit.) |
Boling Point | 182 °C (lit.) |
Flash Point | 79°C |
Storage Condition | 2-8°C |
Refractive Index | 1.553 |
89059-34-7 - Risk and Safety
Risk Codes | R23/24/25 - Toxic by inhalation, in contact with skin and if swallowed.
R34 - Causes burns
R48/20/21/22 -
R68 - Possible risk of irreversible effects
|
Safety Description | S24/25 - Avoid contact with skin and eyes.
S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S28 - After contact with skin, wash immediately with plenty of soap-suds.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
|
UN IDs | UN 1671 6.1/PG 2 |
WGK Germany | 2 |
89059-34-7 - Introduction
phenol-13C6 is a carbon isotope-labeled phenol compound with the chemical formula C6H6O. The following is a description of the nature, use, manufacture and safety information of the phenol-13C6:
Nature:
- phenol-13C6 is colorless crystals or liquid, with a special aromatic odor.
-It is a weak acid that can react with alkali to form salt.
- phenol-13C6 soluble in water, alcohol and ether, in organic solvents can also be dissolved.
Use:
- phenol-13C6 are often used for tracer labeling and tracking the dynamic behavior of compounds, such as in pharmaceutical research and biochemistry.
-It can also be used as an intermediate in organic synthesis for the synthesis of other compounds.
Preparation Method:
- phenol-13C6 can be prepared by reacting phenol with an appropriate amount of a starting material labeled with a carbon isotope. The carbon isotope-labeled raw material is usually 13C-labeled benzene, sodium carbonate, or the like.
Safety Information:
- phenol-13C6 are corrosive compounds and should avoid contact with skin and eyes. Personal protective equipment, such as lab gloves and goggles, should be worn during operation.
-When the phenol-13C6 is heated or in contact with a strong oxidant, it will produce toxic smoke and gas. Therefore, it is necessary to maintain good ventilation during use and avoid direct inhalation of the generated gas.
-The phenol-13C6 should be sealed and kept away from ignition and easily combustible substances.
Last Update:2024-04-09 20:48:19