9,9-dimethyl-N,N-bis(4-methylphenyl)fluoren-2-amine
9,9-dimethyl-N,N-bis(4-methylphenyl)fluoren-2-amine
CAS: 132571-92-7
Molecular Formula: C29H27N
9,9-dimethyl-N,N-bis(4-methylphenyl)fluoren-2-amine - Names and Identifiers
9,9-dimethyl-N,N-bis(4-methylphenyl)fluoren-2-amine - Physico-chemical Properties
| Molecular Formula | C29H27N |
| Molar Mass | 389.53 |
| Density | 1.111±0.06 g/cm3(Predicted) |
| Boling Point | 563.2±49.0 °C(Predicted) |
| pKa | -2.03±0.40(Predicted) |
9,9-dimethyl-N,N-bis(4-methylphenyl)fluoren-2-amine - Introduction
9,9-dimethyl-N,N-bis(4-methylphenyl)fluoren-2-amine is an organic compound with the chemical formula C29H27N. It has the following properties:
1. Appearance: colorless crystal or white solid.
2. melting point: about 200-205 degrees Celsius.
3. Solubility: Slightly soluble in common solvents.
4. stability: stable under general chemical conditions.
The main uses of N-bis(4-methylphenyl)fluoren-2-amine include:
1. Light-emitting material: As the light-emitting layer of some organic light-emitting diodes (OLED), it is used to manufacture display screens and lighting equipment.
2. organic solvents: used as additives for some solvents, pigments and coatings.
3. Reagents in chemical reactions: used as a carrier for reagents in certain organic synthesis reactions.
The method for preparing N-bis(4-methylphenyl)fluoren-2-amine is:
An appropriate fluorene derivative is reacted with an aromatic amine under chemical reaction conditions to produce the target compound.
The safety information on N-bis(4-methylphenyl)fluoren-2-amine has not been fully studied. However, as an organic compound, it may have certain potential safety risks. Therefore, laboratory safety regulations should be observed when handling and using the compound, including wearing appropriate protective equipment, avoiding contact with skin and eyes, and maintaining a well-ventilated laboratory environment. In all cases, consumption, inhalation or contact with the compound should be avoided. If taken by mistake or inhaled by mistake, seek medical attention immediately.
1. Appearance: colorless crystal or white solid.
2. melting point: about 200-205 degrees Celsius.
3. Solubility: Slightly soluble in common solvents.
4. stability: stable under general chemical conditions.
The main uses of N-bis(4-methylphenyl)fluoren-2-amine include:
1. Light-emitting material: As the light-emitting layer of some organic light-emitting diodes (OLED), it is used to manufacture display screens and lighting equipment.
2. organic solvents: used as additives for some solvents, pigments and coatings.
3. Reagents in chemical reactions: used as a carrier for reagents in certain organic synthesis reactions.
The method for preparing N-bis(4-methylphenyl)fluoren-2-amine is:
An appropriate fluorene derivative is reacted with an aromatic amine under chemical reaction conditions to produce the target compound.
The safety information on N-bis(4-methylphenyl)fluoren-2-amine has not been fully studied. However, as an organic compound, it may have certain potential safety risks. Therefore, laboratory safety regulations should be observed when handling and using the compound, including wearing appropriate protective equipment, avoiding contact with skin and eyes, and maintaining a well-ventilated laboratory environment. In all cases, consumption, inhalation or contact with the compound should be avoided. If taken by mistake or inhaled by mistake, seek medical attention immediately.
Last Update：2024-04-10 22:29:15
