A-Bromo-2,3-Dichlorotoluene - Names and Identifiers
Name | 2,3-dichlorobenzyl bromide
|
Synonyms | 2,3-DICHLOROBENZYL BROMIDE 2,3-dichlorobenzyl bromide A-Bromo-2,3-Dichlorotoluene ALPHA-BROMO-2,3-DICHLOROTOLUENE 1-(BroMoMethyl)-2,3-dichlorobenzene 1-(bromomethyl)-2,3-dichlorobenzene Benzene,1-(broMoMethyl)-2,3-dichloro- 1-(Bromomethyl)-2,3-dichlorobenzene, alpha-Bromo-2,3-dichlorotoluene
|
CAS | 57915-78-3
|
InChI | InChI=1/C7H5BrCl2/c8-4-5-2-1-3-6(9)7(5)10/h1-3H,4H2 |
A-Bromo-2,3-Dichlorotoluene - Physico-chemical Properties
Molecular Formula | C7H5BrCl2
|
Molar Mass | 239.92 |
Density | 1.679±0.06 g/cm3(Predicted) |
Melting Point | 29-32 °C |
Boling Point | 140-144 °C (31 mmHg) |
Flash Point | 127.3°C |
Vapor Presure | 0.0169mmHg at 25°C |
Appearance | Low Melting Solid |
Color | White |
Storage Condition | Inert atmosphere,Room Temperature |
Refractive Index | 1.597 |
A-Bromo-2,3-Dichlorotoluene - Risk and Safety
Risk Codes | R34 - Causes burns
R50/53 - Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
R36 - Irritating to the eyes
R22 - Harmful if swallowed
|
Safety Description | S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
S25 - Avoid contact with eyes.
S61 - Avoid release to the environment. Refer to special instructions / safety data sheets.
S60 - This material and its container must be disposed of as hazardous waste.
S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
|
HS Code | 29036990 |
A-Bromo-2,3-Dichlorotoluene - Introduction
2,3-dichlorobenzyl bromide is an organic compound with the chemical formula C7H5BrCl2. The following is a description of some of the properties, uses, methods and safety information of 2,3-dichlorobenzyl bromide:
Nature:
-Appearance: 2,3-dichlorobenzyl bromide is a colorless to pale yellow liquid.
-Solubility: It is soluble in organic solvents such as alcohols and ethers.
-Boiling point: Its boiling point is about 230-235°C.
-Density: Its density is about 1.86g/cm³.
Use:
-Disinfectant: 2,3-dichlorobenzyl bromide has certain antibacterial and bactericidal properties, so it is commonly used in medical, sanitary and disinfection products, such as oral disinfectant, throat cough spray, throat tablets, etc.
-Chemical intermediate: It can also be used as a chemical intermediate in organic synthesis for the synthesis of other organic compounds.
Preparation Method:
2,3-dichlorobenzyl bromide can be prepared by bromination of benzene. Benzene is first reacted with bromine to form a bromobenzene, which is then reacted with chlorine to give the final product, 2,3-dichlorobenzyl bromide.
Safety Information:
- 2,3-dichlorobenzyl bromide is irritating and toxic, so you should follow the correct safety procedures when using it.
-Avoid contact with skin and eyes, and make sure to use it in a well-ventilated area.
-During storage and transportation, care should be taken to avoid contact with strong oxidants and strong acids.
-If ingested or inhaled, seek medical attention immediately.
Last Update:2024-04-10 22:29:15