Name | Cobalt(II) acetate tetrahydrate |
Synonyms | COBALT ACETAT cobalt(2+) diacetate Cobalt Acetate,Tetrahydrate Cobalt ii acetate tetrahydrate Cobaltous acetate tetrahydrate Cobalt(II) acetate tetrahydrate Aceticacid,cobalt(2+)salt,tetrahydrate Cobaltous acetate Bis(acetato)tetraquocobalt COBALTOUS ACETATE TETRAHYDRATE, CRYSTALL IZED 5-propyl-3-(3,4,5-trimethoxyphenyl)-1,2,4-oxadiazole |
CAS | 6147-53-1 |
EINECS | 612-153-6 |
InChI | InChI=1/C2H4O2.Co.4H2O/c1-2(3)4;;;;;/h1H3,(H,3,4);;4*1H2/q;+2;;;;/p-1 |
InChIKey | ZBYYWKJVSFHYJL-UHFFFAOYSA-L |
Molecular Formula | C4H14CoO8 |
Molar Mass | 249.08 |
Density | 1,71 g/cm3 |
Melting Point | 140 °C |
Water Solubility | 380 g/L (20 ºC) |
Solubility | 348g/l |
Appearance | Solid |
Specific Gravity | 1.71 |
Color | Red |
Odor | Acetic acid odour |
Merck | 14,2433 |
BRN | 3731397 |
PH | 7.2 (50g/l, H2O, 20℃) |
Storage Condition | Store at +5°C to +30°C. |
Stability | Stable. Avoid moisture, heat. |
Sensitive | Hygroscopic |
Refractive Index | 1.542 |
Physical and Chemical Properties | Dark red, monoclinic-prismatic crystal. 140 deg C into anhydrous, the relative density of 1.705(18.7/4 deg C). Soluble in water, acid, alcohol. Slightly acetic acid odor, easy to deliquescence. |
Risk Codes | R22 - Harmful if swallowed R38 - Irritating to the skin R40 - Limited evidence of a carcinogenic effect R43 - May cause sensitization by skin contact R53 - May cause long-term adverse effects in the aquatic environment R50/53 - Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R42/43 - May cause sensitization by inhalation and skin contact. R36/37/38 - Irritating to eyes, respiratory system and skin. R20/21/22 - Harmful by inhalation, in contact with skin and if swallowed. R68 - Possible risk of irreversible effects R60 - May impair fertility R49 - May cause cancer by inhalation |
Safety Description | S36/37 - Wear suitable protective clothing and gloves. S61 - Avoid release to the environment. Refer to special instructions / safety data sheets. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S29 - Do not empty into drains. S24 - Avoid contact with skin. S22 - Do not breathe dust. S37/39 - Wear suitable gloves and eye/face protection S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection. S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S60 - This material and its container must be disposed of as hazardous waste. S53 - Avoid exposure - obtain special instructions before use. |
UN IDs | 3077 |
WGK Germany | 2 |
RTECS | AG3325000 |
TSCA | No |
HS Code | 29152300 |
Hazard Class | 9 |
Packing Group | III |
red-purple deliquescent crystals. Soluble in water, acid and ethanol. Dark red, monoclinic prismatic crystals. Microstrip acetic acid odor. Soluble in water, ethanol, dilute acid and amyl acetate. The pH of the 0. 2mol solution was 6.8. The relative density was 1. 705. Refractive index 1-542. There is a potential for cancer. Not easy to burn. By high heat decomposition of toxic gases.
with metal cobalt or cobalt oxide as raw materials, and nitric acid or sulfuric acid reaction to produce cobalt nitrate or cobalt sulfate, and then add acetic acid acidification, evaporation, crystallization, separation, drying, cobalt hydroxide or cobalt carbonate may also be obtained by reaction with excess acetic acid.
The catalyst used in the transesterification reaction is about 0. o1% to 0. o5% in the production of polyester resin. It is also used for the preparation of paint and coating drying agent, printing and dyeing mordant, glass fiber reinforced plastic curing accelerator, etc.
rat oral LD50:708mg/kg. It cannot be mixed with food, food, seeds, feed and various daily necessities.
pH indicator color change ph range | 6.8 |
EPA chemical information | Information provided by: ofmpub.epa.gov (external link) |
use | catalyst for xylene oxidation, desiccant, printing and dyeing mordant, glass fiber reinforced plastic curing accelerator and hidden ink for the production of coatings. catalyst for xylene oxidation is used for surface treatment of aluminum profiles, desiccant for producing coatings, printing and dyeing mordant, glass fiber reinforced plastic curing accelerator and hidden ink, etc. |
production method | cobalt nitrate solution is prepared by reacting metal cobalt or cobalt oxide with nitric acid, and then reacting with ammonium bicarbonate (or soda ash) solution to generate cobalt carbonate precipitation; The precipitate is washed, separated, and acidified with acetic acid to obtain cobalt acetate; After filtration, adjust the reaction solution to pH = 2, concentrate until the relative density of the solution is 1.17-1.20, then add 1kg of acetic acid every 200L of concentrated solution, crystallize for 7-10d at a temperature lower than 20 ℃, centrifuge and dry at 30-40 ℃ to obtain the finished product. The industrial grade cobalt acetate content is not less than 45%. Raw material consumption quota: metal cobalt (>99%)265kg/t, acetic acid 1000kg/t, nitric acid 1100kg/t. |
category | toxic substances |
toxicity classification | poisoning |
acute toxicity | oral-rat LD50 708 mg/kg |
stimulation data | skin-rabbit 500 mg/24 hours moderate; Eye-rabbit 500 mg/24 hours mild |
flammability hazard characteristics | non-combustible, spicy and irritating smoke emitted from the fire site |
storage and transportation characteristics | warehouse low temperature, ventilation, drying |
fire extinguishing agent | water, carbon dioxide, dry powder, sand |