Name | 2-hydroxy-4-(octyloxy)benzophenone |
Synonyms | BP-12 UV 531 UV-531 Octabenzone CHIMASSORB 81 BENZOPHENONE-12 UV Abosorber 531 Ultraviolet absorbent UV-531 2-HYDROXY-4-N-OCTOXYBENZOPHENONE 2-Hydroxy-4-n-octoxy Benzophenone 2-Hydroxy-4-Octyloxy Benzophenone 2-hydroxy-4-(octyloxy)benzophenone 2-HYDROXY-4-N-OCTYLOXYBENZOPHENONE 2-HYDROXY-4-(OCTYLOXY)BENZOPHENONE Ultraviolet Absorbent UV-531(BP-12) 2-HYDROXY-4-(OCTYLOXYL)-BENZOPHENONE [2-Hhydroxy-4-(octyloxy)phenyl]phenylmethanone |
CAS | 1843-05-6 |
EINECS | 217-421-2 |
InChI | InChI=1/C21H26O3/c1-2-3-4-5-6-10-15-24-18-13-14-19(20(22)16-18)21(23)17-11-8-7-9-12-17/h7-9,11-14,16,22H,2-6,10,15H2,1H3 |
InChIKey | QUAMTGJKVDWJEQ-UHFFFAOYSA-N |
Molecular Formula | C21H26O3 |
Molar Mass | 326.43 |
Density | 1.160g/cm3 |
Melting Point | 47-49°C(lit.) |
Boling Point | 424.46°C (rough estimate) |
Flash Point | 102℃ |
Solubility | Chloroform (Slightly), Methanol (Slightly, Sonicated) |
Vapor Presure | 5.25E-09mmHg at 25°C |
Appearance | yellowish-like powder |
Specific Gravity | 1.160 |
Color | Off-White to Light Yellow Low-Melting |
Merck | 14,6742 |
BRN | 1915198 |
pKa | 7.59±0.35(Predicted) |
Storage Condition | Sealed in dry,Room Temperature |
Refractive Index | 1.6000 (estimate) |
MDL | MFCD00027327 |
Physical and Chemical Properties | pale yellow crystals or white powder. Soluble in benzene, hexane, acetone, slightly soluble in ethanol, slightly soluble in dichloroethane. |
Use | Mainly used as polyethylene, polypropylene, polyvinyl chloride, polyurethane rubber and other synthetic materials of light stabilizers |
Risk Codes | R36/37/38 - Irritating to eyes, respiratory system and skin. R50/53 - Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R43 - May cause sensitization by skin contact |
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36 - Wear suitable protective clothing. S61 - Avoid release to the environment. Refer to special instructions / safety data sheets. S60 - This material and its container must be disposed of as hazardous waste. S36/37 - Wear suitable protective clothing and gloves. |
UN IDs | UN 3077 9/PG 3 |
WGK Germany | 1 |
RTECS | DJ1595000 |
TSCA | Yes |
HS Code | 29145090 |
Toxicity | LD50 oral in rat: > 10gm/kg |
Raw Materials | Resorcinol 1-Chlorooctane Ethyl Alcohol |
NIST chemical information | Information provided by: webbook.nist.gov (external link) |
EPA chemical information | Information provided by: ofmpub.epa.gov (external link) |
benzophenone ultraviolet absorber | ultraviolet absorber UV-531 belongs to benzophenone ultraviolet absorber, chemical name 2-hydroxy-4-n-octanoxy benzophenone, light yellow needle-like crystalline powder at room temperature, is a high-efficiency anti-aging additive with excellent performance, can strongly absorb 270 ~ 340nm ultraviolet light, it has the characteristics of light color, non-toxic, good compatibility, low mobility and easy processing. It is widely used in PE, PVC, PP, PS, PC, plexiglass, polypropylene fiber and ethylene vinyl acetate. And for dry phenolic and alkyd varnishes, polyurethane, acrylic, epoxy and other air drying products and automotive finishing paint, powder coatings, polyurethane, rubber products, etc., it provides them with good light stabilization effect. Dosage 0.1%-0.5%. Ultraviolet absorber UV-531 has excellent protective effect on polymers, and helps to reduce color, while delaying yellowing of materials and preventing loss of physical properties. UV-531 has good compatibility with polyolefin, has low volatility, can effectively prevent losses in the processing process, and has no effect on the odor of the product itself, has excellent compatibility with thermoplastic resin, and can be evenly distributed in the polymer during processing. Ultraviolet absorbers are UV-531 in powder and flake forms. The flaky UV531 is easy to add in use, can reduce dust flying, is relatively environmentally friendly, and reduces the processing difficulty, so it is widely used. |
reference quality standard | appearance: light yellow needle crystalline powder content: ≥ 99% melting point: 47-49 c ash:<0.1% light transmittance: 450nm>90% 500nm>95% solubility (25 c)(g/100g solvent): acetone: 74 benzene: 72 methanol: 2 ethanol (95%):2.6 n-heptane: 40 n-hexane: 40.1 methyl ethyl ketone> 60 ethyl acetate> 50 DOP >20 |
uses and characteristics | ultraviolet absorber UV-531 is a high-efficiency anti-aging aid with excellent performance. it can absorb 240-340 nm ultraviolet light and has the characteristics of light color, non-toxicity, good compatibility, low mobility and easy processing. It has the greatest protective effect on polymers, and helps to reduce color, while delaying yellowing and blocking the loss of physical properties. It is widely used in PE, PVC, PP, PS, PC, plexiglass, polypropylene fiber and ethylene vinyl acetate. And for dry phenolic and alkyd varnishes, polyurethane, acrylic, epoxy and other air drying products and automotive finishing paint, powder coatings, polyurethane, rubber products, etc., it provides them with good light stabilization effect. Dosage 0.1%-0.5%. |
ultraviolet absorber | UV-531 ultraviolet absorber used in polymers and vinyl products, it can strongly absorb ultraviolet rays of 300 ~ 375nm. High and low density polyethylene: pipes, plastic greenhouses (combined with LOWILITEQ84 can obtain enhanced effect, with high efficiency and pesticide resistance). Polypropylene (fiber grade, etc.) polyolefin copolymer (EPR, EPDM, EVA...) PVC, polyester, artificial resin, PS, ABS. UV-531 is standard for food packaging materials in many countries. The general dosage is 0.2 ~ 0.6%. In order to prevent caking, the UV-531 should be transported and stored at 30~35 ℃. |
store | avoid yang, high light, moisture, and avoid light stabilizers containing sulfur or halogen elements. It needs to be stored under sealed, dry and dark conditions. |
application | mainly used as light stabilizer for polyethylene, polypropylene, polyvinyl chloride, polyurethane rubber and other synthetic materials widely used in PE, PVC, PP, PS, PC, polycarbonate, plexiglass, polypropylene fiber and ethylene acetic acid and other aspects. And for dry phenolic and alkyd varnishes, polyurethane, acrylic, epoxy and other air drying products and automotive finishing paint, powder coatings, rubber and other products, it provides them with good light stabilization effect. Dosage 0.1-0.5%. |
production method | the mixture of 2, 4-dihydroxybenzophenone, 1-bromon-octane, acetone and potassium carbonate is heated and reacted, filtered, concentrated, cooled, filtered, concentrated, cooled and filtered, and the obtained crude product is recrystallized with ethanol. Got to UV-531. Raw material consumption quota: 2,4-dihydroxybenzophenone 935kg/t, 1-bromon-octane 1265kg/t, potassium carbonate (95.5%)910kg/t, acetone 1040kg/t. |
toxic substance data | information provided by: pubchem.ncbi.nlm.nih.gov (external link) |