Carphenol
Diphenan
CAS: 101-71-3
Molecular Formula: C14H13NO2
Carphenol - Names and Identifiers
| Name | Diphenan |
| Synonyms | Butolen Butolan Diphenan Parafuge 101-71-3 Carphenol p-Benzylphenylurethan 4-Benzylphenylcarbamat 4-BENZYLPHENYL CARBAMATE 4-benzylphenyl carbamate a-Phenyl-p-cresyl Carbamate Carbamate de 4-benzylphényle Carbamic Acid a-Phenyltolyl Ester [4-(phenylmethyl)phenyl] carbamate p-Hydroxydiphenylmethane Carbamate Carbamic Acid p-Benzylphenyl Ester phenol, 4-(phenylmethyl)-, carbamate carbamic acid [4-(benzyl)phenyl] ester |
| CAS | 101-71-3 |
| InChI | InChI=1/C14H13NO2/c15-14(16)17-13-8-6-12(7-9-13)10-11-4-2-1-3-5-11/h1-9H,10H2,(H2,15,16) |
Carphenol - Physico-chemical Properties
| Molecular Formula | C14H13NO2 |
| Molar Mass | 227.26 |
| Density | 1.1223 (rough estimate) |
| Melting Point | 147-150° |
| Boling Point | 368.97°C (rough estimate) |
| Flash Point | 197.8°C |
| Vapor Presure | 1.09E-06mmHg at 25°C |
| Refractive Index | 1.5780 (estimate) |
Carphenol - Introduction
Benzyl ester amine is an organic compound with the chemical formula C14H13NO. The following is a detailed description of the properties, uses, preparation methods and safety information of benzylphenidate amine:
1. nature:
-Appearance: Benzylphenyl ester amine is a colorless or light yellow liquid.
-Solubility: It can be dissolved in organic solvents such as ether, acetone and chloroform.
-Melting point: The melting point of benzylphenyl ester amine is about 20-25 degrees Celsius.
-Density: Its density is about 1.05g/cm³.
2. use:
-Benzylphenyl ester amine is mainly used in organic synthesis as an important intermediate. It can be used to prepare various organic compounds, such as drugs, dyes, fragrances and pesticides.
-Benzylphenyl ester amine can also be used as a catalyst or ligand for catalyst conversion in organic synthesis reactions or ligands in metal catalyzed reactions.
3. Preparation method:
Benzylphenyl ester amine can be prepared by the reaction of benzyl lithium and benzamide. First, benzyl lithium was added dropwise to anhydrous dimethylformamide at a low temperature, and the reaction was stirred. Then, the benzamide was slowly added to the reaction system, and the reaction was continued with stirring, followed by crystallization and purification.
4. Safety Information:
-Benzylphenyl ester amine is an organic compound and should be operated in strict accordance with the safety procedures of the chemical laboratory to avoid skin contact and inhalation.
-It may cause irritation and damage to the eyes, skin and respiratory tract, so appropriate personal protective measures should be taken, such as wearing gloves, goggles and protective clothing.
-During storage and use, keep away from fire and heat sources, and operate in a well-ventilated place.
-In mass production, relevant safety regulations and specifications should be followed to ensure the safety and environmental protection of the operation.
1. nature:
-Appearance: Benzylphenyl ester amine is a colorless or light yellow liquid.
-Solubility: It can be dissolved in organic solvents such as ether, acetone and chloroform.
-Melting point: The melting point of benzylphenyl ester amine is about 20-25 degrees Celsius.
-Density: Its density is about 1.05g/cm³.
2. use:
-Benzylphenyl ester amine is mainly used in organic synthesis as an important intermediate. It can be used to prepare various organic compounds, such as drugs, dyes, fragrances and pesticides.
-Benzylphenyl ester amine can also be used as a catalyst or ligand for catalyst conversion in organic synthesis reactions or ligands in metal catalyzed reactions.
3. Preparation method:
Benzylphenyl ester amine can be prepared by the reaction of benzyl lithium and benzamide. First, benzyl lithium was added dropwise to anhydrous dimethylformamide at a low temperature, and the reaction was stirred. Then, the benzamide was slowly added to the reaction system, and the reaction was continued with stirring, followed by crystallization and purification.
4. Safety Information:
-Benzylphenyl ester amine is an organic compound and should be operated in strict accordance with the safety procedures of the chemical laboratory to avoid skin contact and inhalation.
-It may cause irritation and damage to the eyes, skin and respiratory tract, so appropriate personal protective measures should be taken, such as wearing gloves, goggles and protective clothing.
-During storage and use, keep away from fire and heat sources, and operate in a well-ventilated place.
-In mass production, relevant safety regulations and specifications should be followed to ensure the safety and environmental protection of the operation.
Last Update：2024-04-09 21:01:54
