Cycloctyltrichlorosilane - Names and Identifiers
Cycloctyltrichlorosilane - Physico-chemical Properties
Molecular Formula | C8H15Cl3Si
|
Molar Mass | 245.65 |
Density | 1,19 g/cm3 |
Boling Point | 85-89°C 1,25mm |
Flash Point | 109.5°C |
Vapor Presure | 0.0736mmHg at 25°C |
Specific Gravity | 1.19 |
Sensitive | 8: reacts rapidly with moisture, water, protic solvents |
Refractive Index | 1.476 |
Cycloctyltrichlorosilane - Risk and Safety
Risk Codes | R14 - Reacts violently with water
R34 - Causes burns
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
|
UN IDs | 2987 |
TSCA | No |
Cycloctyltrichlorosilane - Introduction
Trichloro(cyclooctyl)silane is an organosilicon compound with the chemical formula C8H17Cl3Si. The following is a description of the nature, use, formulation and safety information of Trichloro(cyclooctyl)silane:
Nature:
1. Appearance: colorless to light yellow liquid;
2. Melting Point: below -50 ℃;
3. Boiling point: About 230-240 ℃;
4. Density: about 1.06g/cm³;
5. Solubility: Soluble in organic solvents such as alcohols, ethers and aromatic hydrocarbons.
Use:
1. Functional compounds: as intermediates in the synthesis of organosilicon compounds;
2. Surface treatment agent: can be used to improve the wettability and adhesion of the surface of the material;
3. Synthesis of organic silicon compounds: can be used as crosslinking agent of organic silicon polymer;
4. Chemical Synthesis: can be used for the synthesis of pesticides, pharmaceuticals and functional materials.
Method:
The preparation of Trichloro(cyclooctyl)silane is generally obtained by chemical reaction of Cyclooctene with chlorosilane. Among them, trichlororo (Cyclooctene) silane can be obtained by reacting Cyclooctene with trichlorosilane under appropriate conditions.
Safety Information:
1. Trichloro (cycloctyl) silane is irritating and avoids skin contact;
2. Pay attention to good ventilation during operation and wear appropriate protective equipment, such as gloves, goggles and protective clothing;
3. Avoid contact with oxidants and strong acids to prevent dangerous reactions;
4. If accidental contact or inhalation, leave the scene immediately and take corresponding first aid measures;
5. Storage should be sealed to avoid contact with air.
Please exercise caution when using and handling Trichloro(cyclooctyl)silane and follow the relevant safety guidelines.
Last Update:2024-04-09 02:00:43