D6-Omethoate
CAS: 1219804-92-8
Molecular Formula: C5H12NO4PS
D6-Omethoate - Names and Identifiers
D6-Omethoate - Physico-chemical Properties
| Molecular Formula | C5H12NO4PS |
| Molar Mass | 213.19 |
| Storage Condition | 2-8℃ |
D6-Omethoate - Introduction
Methanol is an organic solvent, which is widely used in chemistry and industry. The omethoate-D6 isotope contained in methanol (also known as methanol-D6 or CD3OD) is deuterated methanol. The following is a description of the nature, use, preparation and safety information:
Nature:
-Omethoate-D6 isotope chemical formula is CD3OD, which is similar to the chemical properties of ordinary methanol, but the hydrogen atoms in its molecule are replaced by deuterium, so it is heavier than ordinary methanol and has some special physical and chemical properties.
-Omethoate-D6 isotope has a boiling point of 64.7 ℃, a density of 0.791g/cm³ and a melting point of -97.8 ℃ at 20 ℃.
-Methanol-D6 is a colorless liquid, soluble in water and most organic solvents.
Use:
-Methanol-D6 is mainly used as a nuclear magnetic resonance (NMR) standard, as a solvent and reference material in NMR experiments. Its heavy molecular mass and relatively stable chemical properties make it an ideal NMR solvent.
-Methanol-D6 can also be used as a solvent in drug synthesis, materials science research and other chemical experiments.
Method:
-The preparation of methanol-D6 is mainly obtained by deuteration of formaldehyde (HCHO) under the action of sodium deuteride (NaD). The reaction is usually carried out under the catalysis of carbon dioxide (CO2) and disilicate (SiO2).
Safety Information:
-Methanol-D6 has similar toxicity to ordinary methanol and is harmful to the human body. Exposure, inhalation, or ingestion of Methanol-D6 may cause toxicity and contact with skin, eyes, and respiratory system should be avoided.
-Wear gloves and safety glasses when using methanol-D6, and make sure to use it in a well-ventilated place.
-When handling, storing or disposing of Methanol-D6, the relevant safety procedures should be observed, and attention should be paid to ignition and static electricity to prevent accidents or leakage.
-Observe local laws and regulations and environmental protection requirements when disposing of methanol-D6 waste liquid.
Nature:
-Omethoate-D6 isotope chemical formula is CD3OD, which is similar to the chemical properties of ordinary methanol, but the hydrogen atoms in its molecule are replaced by deuterium, so it is heavier than ordinary methanol and has some special physical and chemical properties.
-Omethoate-D6 isotope has a boiling point of 64.7 ℃, a density of 0.791g/cm³ and a melting point of -97.8 ℃ at 20 ℃.
-Methanol-D6 is a colorless liquid, soluble in water and most organic solvents.
Use:
-Methanol-D6 is mainly used as a nuclear magnetic resonance (NMR) standard, as a solvent and reference material in NMR experiments. Its heavy molecular mass and relatively stable chemical properties make it an ideal NMR solvent.
-Methanol-D6 can also be used as a solvent in drug synthesis, materials science research and other chemical experiments.
Method:
-The preparation of methanol-D6 is mainly obtained by deuteration of formaldehyde (HCHO) under the action of sodium deuteride (NaD). The reaction is usually carried out under the catalysis of carbon dioxide (CO2) and disilicate (SiO2).
Safety Information:
-Methanol-D6 has similar toxicity to ordinary methanol and is harmful to the human body. Exposure, inhalation, or ingestion of Methanol-D6 may cause toxicity and contact with skin, eyes, and respiratory system should be avoided.
-Wear gloves and safety glasses when using methanol-D6, and make sure to use it in a well-ventilated place.
-When handling, storing or disposing of Methanol-D6, the relevant safety procedures should be observed, and attention should be paid to ignition and static electricity to prevent accidents or leakage.
-Observe local laws and regulations and environmental protection requirements when disposing of methanol-D6 waste liquid.
Last Update：2024-04-09 02:00:55
