DI-P-TOLYLDICHLOROSILANE - Names and Identifiers
DI-P-TOLYLDICHLOROSILANE - Physico-chemical Properties
Molecular Formula | C14H14Cl2Si
|
Molar Mass | 281.25 |
Density | 1,1 g/cm3 |
Melting Point | <0°C |
Boling Point | 225-226°C 50mm |
Flash Point | >110°C |
Vapor Presure | 0.000242mmHg at 25°C |
Specific Gravity | 1.10 |
Sensitive | 8: reacts rapidly with moisture, water, protic solvents |
Refractive Index | 1.568 |
DI-P-TOLYLDICHLOROSILANE - Risk and Safety
Risk Codes | 34 - Causes burns
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
|
UN IDs | 2987 |
TSCA | No |
DI-P-TOLYLDICHLOROSILANE - Introduction
Di-P-Tolyldichlorosilane is an organosilicon compound with the chemical formula C6H5CH3SICL2. It is a colorless liquid with a pungent odor.
Di-P-Tolyldichlorosilane is an important organic silicon compound, which is commonly used in the synthesis of silicon heterocyclic compounds and siliconization reactions in organic synthesis. It can be used as a reagent for siliconization reactions in organic synthesis, usually for introducing silicon atoms or replacing other atoms to introduce tolyl or phenyl groups. In addition, it can also be used to synthesize some silicon heterocyclic compounds, such as epoxy silane and epoxy chlorosilane.
The common method for preparing Di-P-Tolyldichlorosilane is through the chemical reaction of p-tolyldichlorosilane and dichlorosilane. The specific reaction conditions need to be adjusted according to the actual situation.
Regarding safety information, Di-P-Tolyldichlorosilane irritating, avoid contact with skin and eyes. Wear appropriate personal protective equipment such as goggles, gloves and laboratory clothing during operation. Avoid inhaling its vapors and operate in a well-ventilated place. If you take it by mistake or inhale it by mistake, you should seek medical attention in time. In addition, the use and storage of chemicals must be carried out in accordance with the relevant safety practices.
Last Update:2024-04-10 22:29:15