FERROCENEACETONITRILE
ferroceneacetonitrile
CAS: 1316-91-2
Molecular Formula: C12H11FeN10*
FERROCENEACETONITRILE - Names and Identifiers
| Name | ferroceneacetonitrile |
| Synonyms | Nsc301053 Ferroceneactonitrile ferroceneacetonitrile FERROCENEACETONITRILE Ferrocenylmethyl cyanide FERROCENYLACETONITRILE (SEE 1762) FERROCENYLACETONITRILE (SEE 1215) |
| CAS | 1316-91-2 |
| InChI | InChI=1/C7H6N.C5H5.Fe/c8-6-5-7-3-1-2-4-7;1-2-4-5-3-1;/h1-4H,5H2;1-5H |
FERROCENEACETONITRILE - Physico-chemical Properties
| Molecular Formula | C12H11FeN10* |
| Molar Mass | 225.07 |
| Melting Point | 81-83°C(lit.) |
| Appearance | Powder |
FERROCENEACETONITRILE - Risk and Safety
| Hazard Symbols | Xn - Harmful |
| Risk Codes | R20/21/22 - Harmful by inhalation, in contact with skin and if swallowed. R36/37/38 - Irritating to eyes, respiratory system and skin. |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S37/39 - Wear suitable gloves and eye/face protection |
| UN IDs | UN3439 |
| WGK Germany | 3 |
| Hazard Class | 6.1 |
| Packing Group | III |
FERROCENEACETONITRILE - Introduction
Acetonitrile Ferrocene is an organometallic compound with the chemical formula Fe(C5H4CN)2. The following is a description of the nature, use, preparation and safety information of acetonitrile ferrocene:
Nature:
1. appearance: acetonitrile ferrocene is a red crystal or red powder.
2. melting point: about 172-175 ℃.
3. Solubility: acetonitrile ferrocene can be dissolved in common solvents.
Use:
1. catalyst: acetonitrile ferrocene can be used as a catalyst in organic synthesis to promote a variety of chemical reactions.
2. battery industry: acetonitrile ferrocene can be used in electrochemical energy storage devices, such as lithium ion batteries, sodium ion batteries, etc.
3. electronic materials: acetonitrile ferrocene can also be used for the preparation of conductive polymer materials and organic electronic devices.
Preparation Method:
acetonitrile The preparation of ferrocene can be obtained by reacting ferrocenyl bromide with acetonitrile. The specific preparation steps are as follows:
1. Add the appropriate molar ratio of cyclopentadienyl iron bromide and acetonitrile to the reaction flask.
2. During the reaction, heat the reaction flask to allow the reaction to proceed.
3. The acetonitrile ferrocene product is obtained by crystallization or filtration.
Safety Information:
1. acetonitrile ferrocene is an organometallic compound, should pay attention to safety in operation.
2. May have potential toxicity and irritation, should avoid contact with skin and eyes.
3. when using acetonitrile ferrocene, it should be equipped with appropriate personal protective equipment, such as laboratory gloves, goggles, etc.
4. Proper laboratory safety practices should be followed when storing and handling acetonitrile ferrocene.
Nature:
1. appearance: acetonitrile ferrocene is a red crystal or red powder.
2. melting point: about 172-175 ℃.
3. Solubility: acetonitrile ferrocene can be dissolved in common solvents.
Use:
1. catalyst: acetonitrile ferrocene can be used as a catalyst in organic synthesis to promote a variety of chemical reactions.
2. battery industry: acetonitrile ferrocene can be used in electrochemical energy storage devices, such as lithium ion batteries, sodium ion batteries, etc.
3. electronic materials: acetonitrile ferrocene can also be used for the preparation of conductive polymer materials and organic electronic devices.
Preparation Method:
acetonitrile The preparation of ferrocene can be obtained by reacting ferrocenyl bromide with acetonitrile. The specific preparation steps are as follows:
1. Add the appropriate molar ratio of cyclopentadienyl iron bromide and acetonitrile to the reaction flask.
2. During the reaction, heat the reaction flask to allow the reaction to proceed.
3. The acetonitrile ferrocene product is obtained by crystallization or filtration.
Safety Information:
1. acetonitrile ferrocene is an organometallic compound, should pay attention to safety in operation.
2. May have potential toxicity and irritation, should avoid contact with skin and eyes.
3. when using acetonitrile ferrocene, it should be equipped with appropriate personal protective equipment, such as laboratory gloves, goggles, etc.
4. Proper laboratory safety practices should be followed when storing and handling acetonitrile ferrocene.
Last Update：2024-04-10 22:29:15
